Read Sony MPK-DVF5M Service Manual online
– 3 –
SECTION 1
GENERAL
This section is extracted from
instruction manual (3-074-447-11).
instruction manual (3-074-447-11).
MPK-DVF5M
4
-GB
Supplied Accessories
Check that the following accessories are supplied with your marine pack.
1
Camera mounting shoe B (1)
2
Spacer C (1)
3
Camera mounting shoe D (1)
4
Cushions for camera mounting shoe
D (2)
D (2)
5
Screw plate for camera mounting
shoe B and D (2)
6
Camera mounting shoe E (1)
7
Screw driver part (1)
Attachment for the camera mounting
shoe B
Attachment for the camera mounting
shoe B
8
NP-FM30 battery pack for the LCD
monitor (1)
monitor (1)
9
Lithium battery CR2 (1)
0
O-ring (1)
qa
Underwater wide-conversion lens
(VCL-MK2) (1)
(VCL-MK2) (1)
qs
Sunshade (1)
qd
Reflex prevention ring (2)
Large: ø 37 mm (1)
Small: ø 30 mm (1)
Large: ø 37 mm (1)
Small: ø 30 mm (1)
qf
Colour filter (VF-MK2) (1)
qg
Grease (1)
qh
Carrying bag (1) Carrying belt (1)
qj
Battery cushion (1)
qk
Strap (3)
1
2
3
4
5
6
8
9
qs
qd
qf
qg
qh
qj
B
7
0
qa
qk
5
-GB
GB
Preparations
Preparing your camcorder
Before installing your camcorder in the marine pack, prepare the camcorder according
to this chapter. The DCR-TRV50E is the model used for illustration purposes.
Otherwise, the model name is indicated in the illustrations. Any differences in
procedure are clearly indicated in the text, for example, “for DCR-TRV50E.”
The procedure may be different depending on your camcorder type.
For details, please refer to the operating instructions supplied with your camcorder.
to this chapter. The DCR-TRV50E is the model used for illustration purposes.
Otherwise, the model name is indicated in the illustrations. Any differences in
procedure are clearly indicated in the text, for example, “for DCR-TRV50E.”
The procedure may be different depending on your camcorder type.
For details, please refer to the operating instructions supplied with your camcorder.
1
Remove the lens cap, shoulder strap,
conversion lens, filter or lenshood from
the camcorder.
conversion lens, filter or lenshood from
the camcorder.
2
Attach a charged battery pack.
3
Insert a cassette tape or “Memory Stick”.
Select the media you want to record onto.
4
Attach the reflex prevention ring to the lens.
for DCR-TRV9E/TRV20E/TRV30E/TRV40E/TRV50E
: ø 37 mm (large)
for DCR-TRV6E/TRV8E/TRV10E/TRV11E/TRV15E/
TRV16E/TRV17E/TRV18E/TRV24E/TRV25E/TRV27E/TRV116E/TRV118E
TRV16E/TRV17E/TRV18E/TRV24E/TRV25E/TRV27E/TRV116E/TRV118E
: ø 30 mm (small)
for DCR-TRV890E/TRV900E
: not necessary
Be sure not too tighten prevention ring.
continued
6
-GB
Preparation (continued)
Camera mounting
shoe B
shoe B
Screw plate
For DCR-TRV8E/TRV10E
Use camera mounting shoe B,
spacer C, and the screw plate.
1
spacer C, and the screw plate.
1
Attach the spacer C to shoe B.
2
Attach the screw plate to
position 3 on shoe B so that the
catch on the reverse side of the
shoe clicks into place.
position 3 on shoe B so that the
catch on the reverse side of the
shoe clicks into place.
3
Fasten the screw of the screw
plate to the tripod screw hole of
the camcorder and tighten
firmly.
plate to the tripod screw hole of
the camcorder and tighten
firmly.
4
Connect the A/V cable of the
shoe to the camcorder’s
AUDIO/VIDEO jack.
shoe to the camcorder’s
AUDIO/VIDEO jack.
Spacer C
3
Installation
position
of the screw plate
on the camera
mounting shoe B
position
of the screw plate
on the camera
mounting shoe B
5
Attach the camera mounting shoe.
For DCR-TRV9E/TRV890E/TRV900E
Use camera mounting shoe B and
the screw plate.
Check the installing position of the
screw plate for your camcorder
against the table below.
the screw plate.
Check the installing position of the
screw plate for your camcorder
against the table below.
DCR-
Camera mounting Shoe B
TRV9E
1
TRV890E
2
TRV900E
2
1
Attach the screw plate to
position 1 on shoe B so that the
catch on the reverse side of the
shoe clicks into place.
position 1 on shoe B so that the
catch on the reverse side of the
shoe clicks into place.
2
Fasten the screw of the screw
plate to the tripod screw hole of
the camcorder and tighten
firmly.
plate to the tripod screw hole of
the camcorder and tighten
firmly.
3
Connect the A/V cable of the
shoe to the camcorder’s
AUDIO/VIDEO jack.
shoe to the camcorder’s
AUDIO/VIDEO jack.
Screw plate
Camera
mounting
shoe B
mounting
shoe B
1
Installation position
of the screw plate
on the camera
mounting shoe B
of the screw plate
on the camera
mounting shoe B
7
-GB
GB
For DCR-TRV6E/TRV11E/TRV15E/TRV17E/TRV20E/TRV30E
Use camera mounting shoe B and D, cushions for camera mounting shoe D and the
screw plate.
Before attaching the camcorder
Check the cushions for camera mounting shoe D and the installing position of the
screw plate for your camcorder against the table below.
screw plate.
Before attaching the camcorder
Check the cushions for camera mounting shoe D and the installing position of the
screw plate for your camcorder against the table below.
Camera
Camera
DCR-
mounting mounting
Cushion
shoe B
shoe D
TRV6E/TRV11E
2
2
Thin
TRV15E/TRV17E
2
3
Thin
TRV20E
2
1
Thin
TRV30E
2
1
Thick
Remove the stick tape from the
cushion for camera mounting shoe
D. Then stick the cushion for
camera mounting shoe D onto
camera mounting shoe D as shown
in the illustration.
cushion for camera mounting shoe
D. Then stick the cushion for
camera mounting shoe D onto
camera mounting shoe D as shown
in the illustration.
1
Attach the screw plate to the
position on shoe D so that the
catch on the reverse side of the
shoe D clicks into place.
The installing position of the
screw plate differs on your
camcorder. For details, refer to
the table above.
position on shoe D so that the
catch on the reverse side of the
shoe D clicks into place.
The installing position of the
screw plate differs on your
camcorder. For details, refer to
the table above.
2
Fasten the screw of the screw
plate on shoe D to the tripod
screw hole of the camcorder and
tighten firmly.
plate on shoe D to the tripod
screw hole of the camcorder and
tighten firmly.
3
Attach the screw plate to the
position 2 on shoe B.
position 2 on shoe B.
4
Fasten the screw of the screw
plate on the shoe B to the screw
hole on the shoe D of the
camcorder tightly.
plate on the shoe B to the screw
hole on the shoe D of the
camcorder tightly.
5
Connect the A/V cable of the
shoe to the camcorder’s
AUDIO/VIDEO jack.
shoe to the camcorder’s
AUDIO/VIDEO jack.
continued
Camera mounting
shoe D
shoe D
Camera mounting
shoe B
shoe B
Screw plate
Installation
position
of the screw plate
of the camera
mounting shoe D
position
of the screw plate
of the camera
mounting shoe D
Screw plate
Click on the first or last page to see other MPK-DVF5M service manuals if exist.