Read Sony MHS-FS1 / MHS-FS1K / MHS-FS2 / MHS-FS2K (serv.man3) Service Manual online
MHS-FS1/FS1K/FS2/FS2K_ADJ
5-3
Pressing the MENU button, the adjustment is completed and the initial screen for the adjustments appears.
To continue the adjustment, perform the operations mentioned from the next page.
Pressing the MENU button after the Bright Pixel adjustment finished normally, the screen will return to
the normal mode. Be sure to turn off the power of the camera once.
When all adjustments are completed, press the ON/OFF (Power) button to finish the adjustment operations.
5-1-5. Setting the Adjustment Mode
1) Download the firmware file “FS1_[][][]ADJ.zip”, “FS1K_[][][]ADJ.zip”, “FS2_[][][]ADJ.zip”, “FS2K_[][][]ADJ.zip” from the ESI homepage.
Uncompress the “FS1_[][][]ADJ.zip”, “FS1K_[][][]ADJ.zip”, “FS2_[][][]ADJ.zip”, “FS2K_[][][]ADJ.zip” , then confirm that it includes the
following item.
• SDV5092C.bin
Note:
Since the file name “SDV5092C.bin” is used on the above four models, pay attention to the applicable model from mistake.
2) Save the uncompressed file “SDV5092C.bin” in the root directory of the slot named “BLOGGIE_SW”.
Note:
Saving it in other directories causes a malfunction of program.
3) With the camera turned off.
4) Disconnect the USB cable from PC.
5) Connect the equipment to be used by referring to “5-1-4 Connecting the Equipment”.
6) Press the MOVIE/ENTER button (Key OK) for about five seconds and release when the LCD display turns on.
7) After a few seconds, the LCD display will turn on and then show the adjustment mode screen.
8) After a few seconds, the adjustment mode screen appears. (Fig. 5-1-4)
Key Left: AWB Adjust
Key Down: Bright Pix Adjust
Key Right: M360 Adjust
Key OK: Set Lang and Check Result
Key Down: Bright Pix Adjust
Key Right: M360 Adjust
Key OK: Set Lang and Check Result
Key Up: AF Adjust
Fig. 5-1-4
Ver.1.1 2011.04
Click on the first or last page to see other MHS-FS1 / MHS-FS1K / MHS-FS2 / MHS-FS2K (serv.man3) service manuals if exist.