HDR-UX3E, HDR-UX5, HDR-UX5E, HDR-UX7, HDR-UX7E (serv.man3) - Sony Movie Service Manual (repair manual). Page 29

6-26

HDR-UX3E/UX5/UX5E/UX7/UX7E_ADJ

Before performing the defect adjustment, make sure that
the lens temperature of the camcorder exceeds 39 ºC.

[Preparation (Temperature Check)]
1) Click the [Preparation] button of the CAMERA Adjustment 5

to display the Preparation screen.

2) Click the [Temperature Check] button of the Preparation screen,

the following screen will appear.

[Checking method]
Click the [Start]  button of the Temperature Check, and the
camcorder will go in the Temperature Check mode and the tem-
perature check result will be displayed on the LCD screen. Per-
form the aging if the check result is NG (below 39 ºC). To exit the
Temperature Check mode, click the [Stop] button.

[Aging method]
Set the camcorder to the Movie mode, and place the LCD screen
in the “reverse-closed” state. (In this state, the temperature rises
more quickly than that in other states.)
Set the camcorder to the Temperature Check mode, and wait until
the LCD screen display changes from NG (grid pattern) to OK
(color bars).

[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Camera Adj.
2. HS White Defect Adj.
3. White Defect Adj.
4. White Defect Adj. (FD white point)
5. White Defect Check
6. Black Defect Adj.
7. Release of Data Setting during Camera Adj.

[Adjusting method]
1) Click the [Start] button of the CAMERA Adjustment 5.
2) The Automatic Adjustment Program executes “1. Data Setting

during Camera Adj.”.

3) If “1. Data Setting during Camera Adj.” completed success-

fully, and the items from “2. HS White Defect Adj.” to “5.
White Defect Check” will be executed.

4) If “5. White Defect Check” completed successfully, the fol-

lowing message is displayed. Set the subject in accordance
with the message.

5) Click the [OK] button, and the “6. Black Defect Adj.” will be

executed.

6) Upon completion of “6. Black Defect Adj.”, “7. Release of

Data Setting during Camera Adj.” is executed.

7) Upon successful completion of all items of the CAMERA Ad-

justment 5, the following message is displayed. Click the [OK]
button.