HDR-TG1, HDR-TG1E, HDR-TG3E (serv.man3) - Sony Movie Service Manual (repair manual). Page 30

6-29

HDR-TG1/TG1E/TG3E_ADJ

4) If the [End] button is clicked, the following screen is displayed

during the execution of “4. Transmissive Mode White Balance
Adj.”. Check that the LCD screen is not colored. If colored,
using the [Up]/[Down] button on the screen, adjust so that the
LCD screen is not colored. After the adjustment, click the [End]
button in the screen.

5) If the [End] button is clicked, “5. Reflective Mode White Bal-

ance Adj.” and “6. Sample Hold Phase Adj.” will be executed.
The following screen is displayed during the execution of “6.
Sample Hold Phase Adj.”. Using the [Up]/[Down]  button on
the screen, adjust so that the 2nd portion A of the LCD screen
is Brightest. After the adjustment, click the [End] button in the
screen.

6) If the [End] button is clicked, “7. Release of Data Setting dur-

ing LCD Adj.” will be executed.

7) Upon successful completion of all item the LCD Adjustment,

the following message is displayed. Click the [OK] button.

[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during LCD Adj.
2. LCD Automatic Adj.

(VCO Adj., Contrast Adj.)

3. V-COM Adj.
4. Transmissive Mode White Balance Adj.
5. Reflective Mode White Balance Adj.
6. Sample Hold Phase Adj.
7. Release of Data Setting during LCD Adj.

[Adjusting method]
1) Click the [Start] button of the LCD Adjustment.
2) The Automatic Adjustment Program executes the “1. Data

Setting during LCD Adj.” and “2. LCD Automatic Adj.”.

3) After that, the following screen is displayed during the execu-

tion of “3. V-COM Adj.”. Using the [Up]/[Down] button on the
screen, adjust so that the brightness of portions A and B on the
LCD panel is equal. After the adjustment, click the [End] but-
ton in the screen.