Read Sony HDR-TG1 / HDR-TG1E / HDR-TG3E (serv.man3) Service Manual online
SECTION 6
ADJUSTMENTS
Revision History
Revision History
Sony EMCS Co.
Auto-ADJ
Ver. 1.1 2008.08
9-852-295-52
2008H0500-1
© 2008.8
Published by Kohda TEC
HDR-TG1/TG1E/TG3E_ADJ
Link
Link
CAMERA SYSTEM ADJUSTMENTS
VIDEO SYSTEM ADJUSTMENTS
PREPARATIONS BEFORE ADJUSTMENTS
CAMERA SECTION ADJUSTMENTS
USB SERIAL No. INPUT
DESTINATION DATA WRITE
ADJUSTMENT PROGRAM
LCD SYSTEM ADJUSTMENTS
AUDIO SYSTEM ADJUSTMENTS
ERROR
APPLICATION FOR ADJUSTMENT (SeusEX)
SERVICE MODE
DATA BACKUP
SERVICE MODE
Adjusting items when replacing main parts and boards
List of service tools
Before starting adjustments
• Use this Service Manual together with the Automatic Adjustment Program (HDR-TG1 Series Auto-Adj
Ver_1.1r02.exe).
HDR-TG1/TG1E/TG3E
6-1
HDR-TG1/TG1E/TG3E_ADJ
Lens device
LCD block LCD901 (LCD panel)
LCD backlight D901
Flash unit (FL27500)
Microphone unit MIC901
SE-174 board SE6602 (PITCH/YAW sensor)
VC-522 board X1301 (Clock generator)
VC-522 board IC2401 (D/A conv.)
VC-522 board IC2501 (Component out AMP)
VC-522 board IC2801 (Video out, Audio I/O)
MS-396 board IC6001 (LCD drive)
CM-096 board (COMPLETE) (Including CMOS imager)
SE-174 board (COMPLETE)
VC-522 board (COMPLETE)
MS-396 board (COMPLETE)
Destination Data
Write
Write
Destination data write
z
USB Serial No.
Input
Input
USB serial No. input
z
(Note 1)
Origin oscillation check
z
z
S VIDEO OUT Y level adj.
S VIDEO OUT chroma level adj.
VIDEO OUT level check
COMPONENT OUT Y level adj.
COMPONENT OUT Pb level adj.
COMPONENT OUT Pr level adj.
S VIDEO OUT chroma level adj.
VIDEO OUT level check
COMPONENT OUT Y level adj.
COMPONENT OUT Pb level adj.
COMPONENT OUT Pr level adj.
CAMERA
adjustment 2
adjustment 2
Flange back adj.
z
z
z
CAMERA
adjustment 3
adjustment 3
Flange back check
z
z
z
F No. & ND light qualiy
standard data input
Mechanical shutter adj
Linear matrix adj.
AWB standard data input
LV standard data input
AWB adj.
Color reproduction adj. & check
MAX GAIN adj.
White defect adj.
Black defect adj.
standard data input
Mechanical shutter adj
Linear matrix adj.
AWB standard data input
LV standard data input
AWB adj.
Color reproduction adj. & check
MAX GAIN adj.
White defect adj.
Black defect adj.
CAMERA
adjustment 7
adjustment 7
Strobe light level & white balance adj.
z
z
CAMERA
adjustment 8
adjustment 8
Steady shot check
z
z
z
LCD automatic adj.
V-COM adj.
V-COM adj.
Transmissive mode white balance adj.
Reflective mode white balance adj.
Sample hold phase adj.
Reflective mode white balance adj.
Sample hold phase adj.
AUDIO adjustment Internal 3ch microphone sensitivity adj.
z
z
z
Parts replacement
Block replacement
Board
replacement
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
Adjusting item
COMPONENT
OUT adjustment
OUT adjustment
S VIDEO OUT and
VIDEO OUT
adjustment
VIDEO OUT
adjustment
Adjustment
Replaced parts
z
z
Touch panel
adjustment
adjustment
Touch panel adj.
CAMERA
adjustment 6
adjustment 6
LCD
adjustment
adjustment
z
z
z
z
CAMERA
adjustment 4
adjustment 4
CAMERA
adjustment 5
adjustment 5
CAMERA
adjustment 1
adjustment 1
z
HALL & MR adj.
z
z
6. ADJUSTMENTS
Before starting adjustments
1-1. Adjusting items when replacing main parts and boards
When replacing main parts and boards, adjust the items indicated by z in the following table.
Note 1:
The Automatic Adjustment Program does not support.
Note 2:
IC2101 (Flash memory) on the VC-522 board cannot be replaced.
Table 6-1-1
6-2
HDR-TG1/TG1E/TG3E_ADJ
Personal computer
(Note)
(Note)
J-1
HASP key and application
for adjustment (SeusEX)
for adjustment (SeusEX)
Contact our service headquarter of each area
how to get the application for adjustment
(SeusEX) and HASP key.
how to get the application for adjustment
(SeusEX) and HASP key.
J-2
USB adaptor assy
A-1539-779-A
A-1539-779-A
J-3
J-10
J-6
J-4
Pattern box PTB-450
J-6082-200-A
or
Small pattern box
PTB-1450
J-6082-557-A
J-6082-200-A
or
Small pattern box
PTB-1450
J-6082-557-A
J-7
Color bar chart
For PTB-450:
J-6020-250-A
J-6020-250-A
For PTB-1450:
J-6082-559-A
J-6082-559-A
J-8
Clear chart
For PTB-450:
J-6080-621-A
J-6080-621-A
For PTB-1450:
J-6082-560-A
J-6082-560-A
J-9
Minipattern box
J-6082-353-B
J-6082-353-B
Siemens star chart
J-6080-875-A
J-6080-875-A
Filter for color
temperature correction
(C14)
J-6080-058-A
temperature correction
(C14)
J-6080-058-A
J-11
ND filter 1.0
J-6080-808-A
J-6080-808-A
ND filter 0.4
J-6080-806-A
J-6080-806-A
ND filter 0.1
J-6080-807-A
J-6080-807-A
J-5
Flange back
adjustment jig
J-6082-563-A
adjustment jig
J-6082-563-A
J-13
Camera table
J-6082-384-A
J-6082-384-A
J-12
Background paper
J-2501-130-A
J-2501-130-A
J-14
J-15
AC adaptor
AC-L200/L200B
1-479-285-21
AC-L200/L200B
1-479-285-21
Tripod Adaptor
J-6082-577-B
J-6082-577-B
1-2. List of service tools
• Oscilloscope
• Color monitor
• Frequency counter
• Amplifier built-in speaker for PC
• Adjustment sound source file
Fig. 6-1-1
Note:
Personal computer
OS:
OS:
Windows 2000/XP Home/XP Pro
RAM: 256MB or more recommended
USB: 2.0 recommended (also compatible with 1.1)
USB: 2.0 recommended (also compatible with 1.1)
Two connectors are required.
6-3
HDR-TG1/TG1E/TG3E_ADJ
To A/V Remote
connector
connector
Interface connector
To DC IN jack
AC IN
S-Video or
Video
Video
S VIDEO OUT and VIDEO OUT Adjustment
Oscilloscope
Terminated
75
75
Ω
Y or Pb or Pr
COMPONENT OUT Adjustment
Oscilloscope
Terminated
75
75
Ω
Audio R
Audio L
HASP Key
USB adaptor assy
(A-1539-779-A)
(A-1539-779-A)
AC adaptor
AC-L200/L200B
(1-479-285-21)
AC-L200/L200B
(1-479-285-21)
PC
(The SeusEX must be installed in the PC.)
OS: Windows 2000/XP
RAM: 256MB or more recommended
USB: 2.0 recommended (also compatible with 1.1)
Two connectors are required.
RAM: 256MB or more recommended
USB: 2.0 recommended (also compatible with 1.1)
Two connectors are required.
Video
Color monitor
Camera system Adjustment
Tripod Adaptor
(J-6082-577-B)
(J-6082-577-B)
Camera table
(J-6082-384-A)
(J-6082-384-A)
Fig. 6-1-2
6-1. CAMERA SECTION ADJUSTMENTS
1-1.
PREPARATIONS BEFORE ADJUSTMENTS
(CAMERA SECTION)
(CAMERA SECTION)
1-1-1.
Preparations
1) Connect the equipment for adjustments according to Fig. 6-1-2.
Ver. 1.1 2008.08
