Read Sony HDR-MV1 Service Manual online
HDR-MV1
2-1
2-1. SELF-DIAGNOSIS FUNCTION
2-1-1. Self-diagnosis Function
When problems occur while the unit is operating, the self-diagnosis
function starts working, and displays on the LCD screen what to do.
This function consists of two display; self-diagnosis display and ser-
vice mode display. Details of the self-diagnosis functions are provided
in the Instruction manual.
function starts working, and displays on the LCD screen what to do.
This function consists of two display; self-diagnosis display and ser-
vice mode display. Details of the self-diagnosis functions are provided
in the Instruction manual.
2-1-2. Self-diagnosis Display
When problems occur while the unit is operating, the LCD screen
shows a 4-digit display consisting of an alphabet and numbers,
which blinks at 3.2 Hz. This 5-character display indicates the “re-
paired by:”, “block” in which the problem occurred, and “detailed
code” of the problem.
shows a 4-digit display consisting of an alphabet and numbers,
which blinks at 3.2 Hz. This 5-character display indicates the “re-
paired by:”, “block” in which the problem occurred, and “detailed
code” of the problem.
2-1-3. Self-diagnosis Code Table
Self-diagnosis Code
Symptom/State
Correction
Repaired by:
Block
Function
Detailed
Code
C
0
4
0
0
Non-standard battery is used.
Use the InfoLITHIUM battery.
C
0
6
0
0
The battery pack temperature is high.
Change the battery pack or place it in a cool place.
C
1
3
0
1
Memory card is unformatted.
Memory card is broken.
Memory card is broken.
Format the memory card.
Insert a new memory card.
Insert a new memory card.
C
1
3
0 2*
Access
error
Remove the power source. Reconnect it again and operate your
camcorder again.
camcorder again.
C
1
3
0
3*
Access error (External media)
Turn power off and turn power on again.
C
1
3
0
4*
Drive fault (External media)
Turn power off and turn power on again.
C
(E
3
2
6
1
6
0
0
0)
Difficult to adjust focus
(Cannot initialize focus)
(Cannot initialize focus)
Retry turn the power on by the power switch.
E
2
0
0
0
Flash memory data are rewritten.
Make flash memory data correct value. (Note 1)
E
3
1
0
0*
Drive fault
Turn power off and turn power on again.
E
4
1
0
0
Wi-Fi module hardware error.
Turn power off and turn power on again.
E
6
1
1
0
Zoom operations fault
(Cannot initialize zoom lens.)
Turn power off and turn power on again.
– ENGLISH –
2. TROUBLE SHOOTING
Note 1: Start the Adjust Manual in the Adjust Station and refer to the “DESTINATION DATA WRITE”.
Note 2: Functions of codes with * mark are not provided in this unit.
Note 2: Functions of codes with * mark are not provided in this unit.
0 0
3 2
C
Repaired by:
Refer to “2-1-3. Self-diagnosis Code Tabl e”.
Indicates the appropriate
step to be taken.
E.g.
13 ....
32 ....Turn on power again.
13 ....
32 ....Turn on power again.
Block
Detailed Code
Blinks at 3.2 Hz
C : Corrected by customer
E : Corrected by service
engineer
Format the “memory card”.
LCD screen
Click on the first or last page to see other HDR-MV1 service manuals if exist.