Read Sony HDR-HC1 / HDR-HC1E / HDR-HC1EK / HDR-HC1K (serv.man4) Service Manual online
6-63
HDR-HC1/HC1E/HC1K/HC1EK_ADJ
4.
Reflective Mode White Balance Adjustment
RadarW
RadarW
RadarW
RadarW
RadarW
(PP-001 board)
Correct the white balance at reflective mode.
If deviated, the LCD screen color cannot be reproduced.
If deviated, the LCD screen color cannot be reproduced.
Mode
VTR stop (PLAY/EDIT mode)
Signal
No signal
Adjustment Page
C
Adjustment Address
70, 71
Note 1: Check that the data of page: 0, address: 10 is “00”.
Adjusting method:
Order Page Address Data
Procedure
1
0
01
01
2
3
C4
59
3
3
C5
02
4
3
0C
20
Press PAUSE button.
5
3
22
0F
Press PAUSE button.
6
3
01
66
Press PAUSE button. (Note 2)
7
3
02
Check the data changes to
“00”.
“00”.
8
3
03
Check the data is “02”. (Note 4)
9
3
03
00
10
3
01
67
Press PAUSE button. (Note 3)
11
3
02
Check the data changes to
“00”.
“00”.
12
3
03
Check the data is “02”. (Note 4)
13
3
03
00
14
3
C4
00
15
3
C5
00
16
3
0C
00
Press PAUSE button.
17
3
22
00
Press PAUSE button.
18
0
01
00
Note 2: The adjustment data will be automatically input to page:
C, address: 70.
Note 3: The adjustment data will be automatically input to page:
C, address: 71.
Note 4: If the data is “01”, adjustment has error.
5.
Touch Panel Adjustment
Adjust the calibration of touch panel.
Mode
VTR stop (PLAY/EDIT mode)
Signal
No signal
Adjustment Page
A
Adjustment Address
90 to 93
Note 1: This adjustment should be carried out upon completetion
of “LCD Automatic Adjustment”.
Note 2: Check that the data of page: 0, address: 10 is “00”.
Note 3: Check that a Memory Stick Duo is not insteted.
Note 4: Check that the LCD panel is not reverse mode.
Note 5: Adjustment must be performed while observing the LCD
Note 3: Check that a Memory Stick Duo is not insteted.
Note 4: Check that the LCD panel is not reverse mode.
Note 5: Adjustment must be performed while observing the LCD
screen from the front.
Preparation:
Order Page Address Data
Procedure
1
5
01
01
2
5
05
00
3
5
06
A2
4
5
07
00
5
5
08
00
6
5
09
00
7
5
0A
FF
8
5
0B
00
9
5
0C
00
10
5
0D
00
11
5
0E
01
12
5
00
01
Press PAUSE button.
13
Check that the touch panel
adjustment screen is
displayed.
adjustment screen is
displayed.
14
Perform “Adjusting method”.
Adjusting method:
1) Using a ball-point pen etc., push the center of “
1) Using a ball-point pen etc., push the center of “
” indicated
in the part A.
2) Using a ball-point pen etc., push the center of “
” indicated
in the part B.
3) Using a ball-point pen etc., push the center of “
” indicated
in the part C.
A
C
B
Fig. 6-1-24
Click on the first or last page to see other HDR-HC1 / HDR-HC1E / HDR-HC1EK / HDR-HC1K (serv.man4) service manuals if exist.