Read Sony HDR-HC1 / HDR-HC1E / HDR-HC1EK / HDR-HC1K (serv.man4) Service Manual online
SECTION 6
ADJUSTMENTS
HDR-HC1/HC1E/HC1K/HC1EK
RMT-831
ADJ
Revision History
Revision History
Ver. 1.2 2007.09
Link
Link
Adjusting items when replacing main parts and boards
List of service tools
Before starting adjustments
ELECTRONIC VIEWFINDER SYSTEM
ADJUSTMENTS
ADJUSTMENTS
LCD SYSTEM ADJUSTMENTS
CAMERA SYSTEM ADJUSTMENTS
PREPARATIONS BEFORE ADJUSTMENTS
INITIALIZATION OF EEPROM DATA
CAMERA SECTION ADJUSTMENTS
TAPE PATH ADJUSTMENT
HOW TO ENTER PLAYBACK MODE WITHOUT
CASSET
CASSET
TE
HOW TO ENTER RECORD MODE WITHOUT
CASSET
CASSET
TE
MECHANISM SECTION ADJUSTMENTS
AUDIO SYSTEM ADJUSTMENTS
VIDEO SYSTEM ADJUSTMENTS
SERVO AND RF SYSTEM ADJUSTMENTS
SYSTEM CONTROL SYSTEM ADJUSTMENTS
PREPARATIONS BEFORE ADJUSTMENTS
VIDEO SECTION ADJUSTMENTS
SERVICE MODE
DATA PROCESS
ADJUSTMENT REMOTE COMMANDER
SERVICE MODE
Sony EMCS Co.
2007I0500-1
© 2007.9
Published by Kohda TEC
9-876-883-52
HDR-HC1/HC1E/HC1K/HC1EK_ADJ
NTSC MODEL: HDR-HC1/HC1K
PAL MODEL: HDR-HC1E/HC1EK
PAL MODEL: HDR-HC1E/HC1EK
— 2 —
HDR-HC1/HC1E/HC1K/HC1EK_ADJ
TABLE OF CONTENTS
6.
ADJUSTMENTS
Before Starting Adjustments ····················································· 6-1
1-1.
1-1.
Adjusting Items when Replacing Main Parts and
Boards ·············································································· 6-2
Boards ·············································································· 6-2
1-2.
List of Service Tools ························································ 6-4
6-1.
Camera Section Adjustments ··········································· 6-5
1-1.
Preparations before Adjustments (CAMERA Section) ··· 6-5
1-2.
Initialization of EEPROM Data ······································· 6-8
1-3.
Camera System Adjustments ········································· 6-28
1-4.
Electronic Viewfinder System Adjustments ·················· 6-56
1-5.
LCD System Adjustments ············································· 6-61
6-2.
Mechanism Section Adjustments ·································· 6-64
2-1.
How To Enter Record Mode Without Cassette ·············· 6-64
2-2.
How To Enter Playback Mode Without Cassette ·········· 6-64
2-3.
Tape Path Adjustment ···················································· 6-64
6-3.
Video Section Adjustments ··········································· 6-65
3-1.
Preparations Before Adjustments ·································· 6-65
3-2.
System Control System Adjustments ···························· 6-67
3-3.
Servo and RF System Adjustments ······························· 6-69
3-4.
Video System Adjustments ············································ 6-71
3-5.
Audio System Adjustments ··········································· 6-75
6-4.
Service Mode ································································· 6-76
4-1.
Adjustment Remote Commander ·································· 6-76
4-2.
Data Process ·································································· 6-77
4-3.
Service Mode ································································· 6-78
Section
Title
Page
* The color reproduction frame is shown on page 6-87, 88
6-1
HDR-HC1/HC1E/HC1K/HC1EK_ADJ
SECTION 6
ADJUSTMENTS
1.
Before starting adjustments
EVR Data Re-writing Procedure When Replacing Board
The data that is stored in the repair board, is not necessarily correct.
Perform either procedure 1 or procedure 2 or procedure 3 when replacing board.
Procedure 1
Save the EVR data of the machine in which a board is going to be replaced. Download the saved data after a
board is replaced.
board is replaced.
Remove the EEPROM and install it.
(Former board)
(New board)
Procedure 2
Remove the EEPROM from the board of the machine that is going to be repaired. Install the removed
EEPROM to the replaced board.
EEPROM to the replaced board.
Procedure 3
When the data cannot be saved due to defective EEPROM, or when the EEPROM cannot be removed or
installed, save the data from the same model of the same destination, and download it.
installed, save the data from the same model of the same destination, and download it.
After the EVR data is saved and downloaded, check the
respective items of the EVR data.
(Refer to page 6-3 for the items to be checked)
respective items of the EVR data.
(Refer to page 6-3 for the items to be checked)
(Machine before starting repair)
(Machine after a board is replaced)
PC
PC
Save the EVR data
to a personal computer.
to a personal computer.
Download the saved
data to a machine.
data to a machine.
(Machine to be repaired)
(Machine to be repaired)
(The same model of the same destination)
Save the data.
Download the data.
PC
6-2
HDR-HC1/HC1E/HC1K/HC1EK_ADJ
1-1. Adjusting items when replacing main parts and boards
• Adjusting items when replacing main parts
When replacing main parts, adjust the items indicated by z in the following table.
Note 1: When replacing the drum assy or the mechanism deck, reset the data of page: 7, address: A8 to AB to “00”. (Refer to “Record of
• Adjusting items when replacing main parts
When replacing main parts, adjust the items indicated by z in the following table.
Note 1: When replacing the drum assy or the mechanism deck, reset the data of page: 7, address: A8 to AB to “00”. (Refer to “Record of
Use check” of “6-4. SERVICE MODE”)
Table 6-1-1 (1)
Replaced part
Block replacement
Mounted part replacement
Adjustment Section
Adjustment
(LCD panel, Touch panel)
(Back light LED)
(LCD panel)
(Control switch block (zoom lever))
(Drum assembly) (Note 1)
(CMOS imager)
(PITCH, YAW sensor)
(Clock generator)
(CDS, A/D converter)
(Base band signal process, etc)
(DV signal process)
(Video IN/OUT)
(Component out AMP)
(REC/PB AMP)
(EVF driver)
(Timing generator (EVF))
(Back light (EVF))
(LCD driver, Timing generator (LCD))
Lens device
LCD block LCD9001
LCD block D9001
EVF block LCD9002
PS12300 block
Flash unit FL12300
Mechanism deck (Note 1)
Mechanism deck M9001
Mechanism deck MD block
EE-001 board IC6601
EE-001 board SE6801, 6802
TT-001 board IC1403, X1401
TT-001 board IC1201
TT-001 board IC2201
TT-001 board IC4001
TT-001 board IC4401
TT-001 board IC2401
NN-001 board IC7601
NN-001 board IC7801
NN-001 board IC7802
UU-001 board D9801
PP-001 board IC8701
Initialization of
Initialization of A, B, D, 1A, 1B page data
EEPROM data
Initialization of 8, C, 13, 18, 1C page data
Initialization of 9, 1D page data
Initialization of F, 63 to 6F page data
Initialization of 9, 1D page data
Initialization of F, 63 to 6F page data
Camera
Origin oscillation check
z
HALL adj.
z
MR adj.
z
Image sensor output 2ch matching adj.
z
z
Flange back and zoom lever center adj.
z
z
z
F No. & ND light quality standard data input
z
Mechanical shutter adj.
z
Auto white balance standard data input
z
z
LV standard data input
z
z
Auto white balance adj.
z
z
Color reproduction adj.
z
z
PCGM standard data input
z
z
MAX GAIN adj.
z
z
White defect Adj.
z
Black defect Adj.
z
z
Strobe light level adj.
z
Strobe white balance adj.
z
Steadyshot check
z
EVF
VCO adj.
z
z
Back light adj.
z
z
PSIG adj.
z
V-COM level adj.
z
RGB AMP adj.
z
Contrast adj.
z
z
White balance adj.
z
z
z
LCD
LCD automatic adj.
z
z
V-COM adj.
z
z
Transmissive mode white balance adj.
z
z
z
Reflective mode white balance adj.
z
z
Touch panel adj.
z
z
Mechanism
Tape path adj.
z
z
z
System control
Node uniqe ID No. input
Servo, RF
CAP FG duty adj.
z
z
Switching position adj.
z
z
z
Error rate check
z
z
z
z
z
Video
S VIDEO OUT Y level adj.
z
z
S VIDEO OUT chroma level adj.
z
z
COMPONENT OUT Y level adj.
z
z
COMPONENT OUT Pr level adj.
z
z
COMPONENT OUT Pb level adj.
z
z
