HDR-CX11E, HDR-CX12, HDR-CX12E (serv.man3) - Sony Movie Service Manual (repair manual). Page 10

6-9

HDR-CX11E/CX12/CX12E_ADJ

The DESTINATION DATA WRITE can be set with the
Service board only.
Performing the DESTINATION DATA WRITE with other
than the Service board causes the error (E:20:00 will be
blinking) and the power to be shut down.

Click the [DESTINATION DATA WRITE] button on the Main Menu
screen, and the “DESTNATION DATA WRITE” screen in Fig. 6-
1-10 will appear.

1

[To Menu] button
Return to the main menu.

2

Destination Check button
Current destination setting checked when the “DESTINATION
DATA WRITE” screen started is displayed.
When this button is clicked, the destination is checked and the
display is updated.

3

Model Name List
Selects the model name.

4

Destination List
Selects the written destination.

5

[Data Write] button
Write the destination data to the camcorder.

[Writing method]
1) Select the model name from the pulldown list.

2) Select the target destination from the pulldown list.

3) Click the [Data Write] button.

4) Following message will be appeared after completing data

writing.

5) After the destination data writing completed, click the Desti-

nation Check button to check the destination.

4

3

5

1

2