DCR-HC28 (serv.man3) - Sony Movie Service Manual (repair manual)

dcr-hc28 (serv.man3) service manual
Model
DCR-HC28 (serv.man3)
Pages
59
Size
555.42 KB
Type
PDF
Document
Service Manual
Brand
Device
Movie / SECTION 6 ADJUSTMENTS BRAZIL
File
dcr-hc28-sm3.pdf
Date

Read Sony DCR-HC28 (serv.man3) Service Manual online

SEÇÃO 6
AJUSTES
Revision History
Revision History
Link
Link
Sony EMCS Co.
AJUSTES DA SISTEMA DE VISOR ELETRÔNICO
INICIALIZAÇÃO DE DADOS DAS PÁGINAS 
8, A, C, D, E, F, 1C, 1F 
AJUSTES DA SISTEMA DO LCD
AJUSTES DA SISTEMA DE CÂMERA
AJUSTES DA SEÇÃO DE CÂMERA
AJUSTES DA SISTEMA DE ÁUDIO
AJUSTES DA SISTEMA DE SERVO E RFTS
AJUSTES DA SISTEMA DE VÍDEO
AJUSTES DA SISTEMA DE SYSTEM CONTROL
PREPARAÇÕES ANTES DE AJUSTES
AJUSTES DA SEÇÃO DE VIDEO
PROCESSO DE DADO
MODO DE SERVIÇO
AJUSTANDO COM CONTROLE REMOTO (RM-95)
MODO DE SERVIÇO
AJUSTANDO COM CONTROLE REMOTO
(NEW LANC JIG)
Itens dos ajustes quando trocar as placas e principais peças
Lista de ferramentaspara serviço
Antes de iniciar os ajustes
COMO ENTRAR NO MODO DE REPRODUÇÃO
(PLAY) SEM COLOCAR A FITA
COMO ENTRAR NO MODO DE GRAVAÇÃO(REC)
SEM COLOCAR A FITA
AJUSTE DA PASSAGEM DA FITA
AJUSTES DA SEÇÃO DO MECANISMO
ADJ
Ver 1.1  2006.12
9-
890-088-51
2006L0500-1
© 2006.12
Published by Kohda TEC
DCR-HC28
• Precaution on Replacing the VC-416 Board
DCR-HC28_ADJ
PREPARAÇÕES ANTES DE AJUSTES
Sony Brasil Ltda - Engenharia da Qualidade
— 2 —
DCR-HC28_ADJ
TABLE OF CONTENTS
6.
ADJUSTMENTS
1.
Before Starting Adjustments ··········································· 6-1
1-1.
Adjusting Items when Replacing Main Parts and
Boards ·············································································· 6-3
1-2.
List of Service Tools ························································ 6-5
6-1.
Camera Section Adjustments ··········································· 6-6
1-1.
Preparations before Adjustments (CAMERA Section) ··· 6-6
1-2.
Initialization of 8, A, C, D, E, F, 1C, 1F Page Data ········ 6-9
1-3.
Camera System Adjustments ········································· 6-17
1-4.
Electronic Viewfinder System Adjustments ·················· 6-27
1-5.
LCD System Adjustments ············································· 6-29
6-2.
Mechanism Section Adjustments ·································· 6-32
2-1.
How To Enter Record Mode Without Cassette ·············· 6-32
2-2.
How To Enter Playback Mode Without Cassette ·········· 6-32
2-3.
Tape Path Adjustment ···················································· 6-32
6-3.
Video Section Adjustments ··········································· 6-33
3-1.
Preparations Before Adjustments ·································· 6-33
3-2.
System Control System Adjustments ···························· 6-35
3-3.
Servo and RF System Adjustments ······························· 6-37
3-4.
Video System Adjustments ············································ 6-40
3-5.
Audio System Adjustments ··········································· 6-43
6-4.
Service Mode ································································· 6-45
4-1.
Adjustment Remote Commander (RM-95) ··················· 6-45
4-2.
Adjustment Remote Commander (New Lanc Jig) ········ 6-46
4-3.
Data Process ·································································· 6-47
4-4.
Service Mode ································································· 6-48
Section
Title
Page
*
The camera color reproduction frame is shown on page
6-56.
6-1
DCR-HC28_ADJ
SECTION 6
ADJUSTMENTS
1.
Before starting adjustments
EVR Data Re-writing Procedure When Replacing Board
The data that is stored in the repair board, is not necessarily correct.
Perform either procedure 1 or procedure 2 or procedure 3 when replacing board.
Procedure 1
Save the EVR data of the machine in which a board is going to be replaced.  Download the saved data after a
board is replaced.
Remove the EEPROM and install it.
(Former board)
(New board)
Procedure 2
Remove the EEPROM from the board of the machine that is going to be repaired.  Install the removed
EEPROM to the replaced board.
Procedure 3
When the data cannot be saved due to defective EEPROM, or when the EEPROM cannot be removed or
installed, save the data from the same model of the same destination, and download it.
After the EVR data is saved and downloaded, check the
respective items of the EVR data.
(Refer to page 6-3 for the items to be checked)
(Machine before starting repair)
(Machine after a board is replaced)
PC
PC
Save the EVR data 
to a personal computer.
Download the saved 
data to a machine.
(Machine to be repaired)
(Machine to be repaired)
(The same model of the same destination)
Save the data.
Download the data.
PC
6-2
DCR-HC28_ADJ
Precaution on Replacing the VC-416 Board
• Perform “Exif Model Data Check” mentioned below, and also the adjustment items necessary after VC Board re-
placement.
Exif Model Data Check
When you replace to the repairing board, the written data of repairing board also might be changed to original setting.
When the data has changed because of board replaceing etc, check the data setting (Exif Model Data) is right. If not,
rewrite to the right value.
Exif Model Data
Writing Method:
1) Select page: 0, address: 01 and set data: 01.
2) Select page: C, address: D2 to D4, and set the Exif Model Data.
Note:
To write in the non-volatile memory (EEPROM), press the PAUSE (Write) button each time to set the data.
3) Select page: 0, address: 01, and set data: 00.
Address
D2
D3
D4
Page
C
C
C
Data
DCR-HC27E
32
37
45
DCR-HC28
32
38
00
DCR-HC28E
32
38
45
Page of 59
Display

Download Sony DCR-HC28 (serv.man3) Service Manual (Repair Manual)

Here you can read online and download Sony DCR-HC28 (serv.man3) Service Manual in PDF. DCR-HC28 (serv.man3) service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sony DCR-HC28 (serv.man3) Movie. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.