Read Sony DCR-VX2200E (serv.man2) Service Manual online
6-14
DCR-VX2200E_ADJ
10. 1E Page table
Note 1:
Note 1:
If reading/writing data on pages 1E, set data: 01 to page:
0, address: 10, and then select pages: E. By this data set-
ting, the pages 1E can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: E. By this data set-
ting, the pages 1E can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the 8, 9, C, 13, 18, 1C, 1D, 1E Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 8, 9, C, 13, 18, 1C, 1D, 1E Page Data”)
the 8, 9, C, 13, 18, 1C, 1D, 1E Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 8, 9, C, 13, 18, 1C, 1D, 1E Page Data”)
Address
Initial value
Remark
00 to 81
Fixed data-1 (Initialized data)
82
Fixed data-2
83, 84
Fixed data-1 (Initialized data)
85, 86
Fixed data-2
87 to FF
Fixed data-1 (Initialized data)
1-2-3.
Initialization of Camera Control Page Data
1.
Initializing of Camera Control Page Data
Note 1:
If “Initialization of Camera Control Page Data” is ex-
ecuted, all data on camera control page are initialized.
(Only an individual page cannot be initialized)
ecuted, all data on camera control page are initialized.
(Only an individual page cannot be initialized)
Note 2:
If the camera control page data has been initialized, the
following adjustments need to be performed again.
1) Modification of camera control page data
2) Camera system adjustment (if all areas were initial-
following adjustments need to be performed again.
1) Modification of camera control page data
2) Camera system adjustment (if all areas were initial-
ized)
Adjustment Page
6D
Adjustment Address
00 to F9
Adjustment Page
6E
Adjustment Address
00 to FF
Adjustment Page
6F
Adjustment Address
10 to FF
Adjustment Page
7C
Adjustment Address
00 to FF
Adjustment Page
7E
Adjustment Address
00 to FF
Adjustment Page
7F
Adjustment Address
00 to 7F
Adjustment Page
8C
Adjustment Address
00 to F9
Adjustment Page
8D
Adjustment Address
00 to FF
Adjustment Page
8E
Adjustment Address
00 to FF
Adjustment Page
8F
Adjustment Address
00 to FF
Adjustment Page
9D
Adjustment Address
00 to 4F
Adjustment Page
9E
Adjustment Address
00 to FF
Adjustment Page
9F
Adjustment Address
00 to FF
Adjustment Page
AD
Adjustment Address
00 to 4F
Adjustment Page
AE
Adjustment Address
00 to F1
Adjustment Page
AF
Adjustment Address
00 to FF
Adjustment Page
BE
Adjustment Address
00 to F9
Adjustment Page
BF
Adjustment Address
00 to FF
Adjustment Page
C2
Adjustment Address
00 to FF
Adjustment Page
C3
Adjustment Address
00 to FF
Adjustment Page
C4
Adjustment Address
00 to FF
Adjustment Page
C5
Adjustment Address
00 to FF
8.
1C Page table
Note 1:
If reading/writing data on pages 1C, set data: 01 to page:
0, address: 10, and then select pages: C. By this data set-
ting, the pages 1C can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to“00”.
0, address: 10, and then select pages: C. By this data set-
ting, the pages 1C can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to“00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the 8, 9, C, 13, 18, 1C, 1D, 1E Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 8, 9, C, 13, 18, 1C, 1D, 1E Page Data”)
the 8, 9, C, 13, 18, 1C, 1D, 1E Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 8, 9, C, 13, 18, 1C, 1D, 1E Page Data”)
Address
Initial value
Remark
00 to FF
Fixed data-1 (Initialized data)
9.
1D Page table
Note 1:
If reading/writing data on pages 1D, set data: 01 to page:
0, address: 10, and then select pages: D. By this data
setting, the pages 1D can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: D. By this data
setting, the pages 1D can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the 8, 9, C, 13, 18, 1C, 1D, 1E Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 8, 9, C, 13, 18, 1C, 1D, 1E Page Data”)
the 8, 9, C, 13, 18, 1C, 1D, 1E Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 8, 9, C, 13, 18, 1C, 1D, 1E Page Data”)
Address
Initial value
Remark
00 to FF
Fixed data-1 (Initialized data)
Click on the first or last page to see other DCR-VX2200E (serv.man2) service manuals if exist.