Read Sony DCR-TRV238E / DCR-TRV239E (serv.man10) Service Manual online
— 2 —
DCR-TRV238E/TRV239E
Page
5-19
5-23
INCORRECT
CORRECT
3.
Flange Back Adjustment
(Using Flange Back Adjustment Chart and
Subject More Than 500m Away)
(Using Flange Back Adjustment Chart and
Subject More Than 500m Away)
3-1. Flange Back Adjustment (1)
Subject
Flange back adjustment chart
(2.0 m from the front of the protection
glass) (Luminance: 350 ± 50 lux)
glass) (Luminance: 350 ± 50 lux)
Measuring Instrument
Adjustment remote commander
Adjustment Page
F
Adjustment Address
46 to 56
Note1:
This adjustment should be carried out upon completion of
“HALL adjustment”.
“HALL adjustment”.
Note2:
Make the lens horizontal and perform this adjustment.
Note3:
The data of page: 0, address: 10 must be “00”.
Note4:
Check that the data of page: 6, address: 02 is “00”. If not, set
data: 00 to this address, and press the PAUSE button.
data: 00 to this address, and press the PAUSE button.
3-2. Flange Back Adjustment (2)
Subject
Subject more than 500m away
(Subjects with clear contrast such
as buildings, etc.)
(Subjects with clear contrast such
as buildings, etc.)
Measurement Point
Check operation on TV monitor
Measuring Instrument
Adjustment Page
F
Adjustment Address
46 to 56
Note1:
Make the lens horizontal and perform this adjustment.
Note2:
The data of page: 0, address: 10 must be “00”.
Note3:
Check that the data of page: 6, address: 02 is “00”. If not, set
data: 00 to this address, and press the PAUSE button.
data: 00 to this address, and press the PAUSE button.
8. Auto White Balance & LV Standard Data Input
Subject
Clear chart
(Color reproduction adjustment frame)
Measurement Point
Display data of page 1 (Note5)
Measuring Instrument
Adjustment remote commander
Adjustment Page
F
Adjustment Address
1E, 1F, 2A to 2D
Specified Value
0FF0 to 1010
Note1:
This adjustment should be carried out upon completion of
“Color reproduction adjustments”.
“Color reproduction adjustments”.
Note2:
After the power is turned on, this adjustment can be done
only once.
only once.
Note3:
The data of page: 0, address: 10 must be “00”.
Note4:
Check that the data of page: 6, address: 02 is “00”. If not, set
data: 00 to this address, and press the PAUSE button.
data: 00 to this address, and press the PAUSE button.
Note5:
Displayed data of page 1 of the adjustment remote
commander.
commander.
1 : XX : XX
Display data
3.
Flange Back Adjustment
(Using Flange Back Adjustment Chart and
Subject More Than 500m Away)
(Using Flange Back Adjustment Chart and
Subject More Than 500m Away)
3-1. Flange Back Adjustment (1)
Subject
Flange back adjustment chart
(2.0 m from the front of the protection
glass) (Luminance: 350 ± 50 lux)
glass) (Luminance: 350 ± 50 lux)
Measuring Instrument
Adjustment remote commander
Adjustment Page
F
Adjustment Address
46 to 56
Note1:
This adjustment should be carried out upon completion of
“HALL adjustment”.
“HALL adjustment”.
Note2:
Make the lens horizontal and perform this adjustment.
Note3:
The data of page: 0, address: 10 must be “00”.
Note4:
Check that the data of page: 6, address: 02 is “00”. If not, to
page: 6, address: 01, set data: 00, and press the PAUSE button.
page: 6, address: 01, set data: 00, and press the PAUSE button.
3-2. Flange Back Adjustment (2)
Subject
Subject more than 500m away
(Subjects with clear contrast such
as buildings, etc.)
(Subjects with clear contrast such
as buildings, etc.)
Measurement Point
Check operation on TV monitor
Measuring Instrument
Adjustment Page
F
Adjustment Address
46 to 56
Note1:
Make the lens horizontal and perform this adjustment.
Note2:
The data of page: 0, address: 10 must be “00”.
Note3:
Check that the data of page: 6, address: 02 is “00”. If not, to
page: 6, address: 01, set data: 00, and press the PAUSE button.
page: 6, address: 01, set data: 00, and press the PAUSE button.
8. Auto White Balance & LV Standard Data Input
Subject
Clear chart
(Color reproduction adjustment frame)
Measurement Point
Display data of page 1 (Note5)
Measuring Instrument
Adjustment remote commander
Adjustment Page
F
Adjustment Address
1E, 1F, 2A to 2D
Specified Value
0FF0 to 1010
Note1:
This adjustment should be carried out upon completion of
“Color reproduction adjustments”.
“Color reproduction adjustments”.
Note2:
After the power is turned on, this adjustment can be done
only once.
only once.
Note3:
The data of page: 0, address: 10 must be “00”.
Note4:
Check that the data of page: 6, address: 02 is “00”. If not, to
page: 6, address: 01, set data: 00, and press the PAUSE button.
page: 6, address: 01, set data: 00, and press the PAUSE button.
Note5:
Displayed data of page 1 of the adjustment remote
commander.
commander.
1 : XX : XX
Display data
:
Changed portion.
Click on the first or last page to see other DCR-TRV238E / DCR-TRV239E (serv.man10) service manuals if exist.