DCR-TRV140, DCR-TRV140E, DCR-TRV140M (serv.man2) - Sony Movie Service Manual (repair manual). Page 5

J-9

J-10

J-11

J-12

I/F unit for LANC control

Mini pattern box

Camera table

CPC jig connector

J-6082-521-A

J-6082-353-B

J-6082-384-A

J-6082-539-A

For connecting the adjustment remote commander

For adjusting the flange back

For adjusting the flange back

For connecting the adjustment remote commander

If the micro processor IC in the adjustment remote com-
mander is not the new micro processor (UPD7503G-C56-
12), the pages cannot be switched. In this case, replace
with the new micro processor (8-759-148-35).

J-1

J-2

J-3

J-4

J-5

J-6

J-7

J-8

J-9

J-10

J-11

J-12

Ref. No.

Name

Parts Code

Usage

• Oscilloscope

• Color monitor

• Vectorscope

• Regulated power supply

• Digital voltmeter

• Frequency counter

5-4

-

&

5-5

For details of how remove the cabinet and boards, refer
to “2. DISASSEMBLY”.

When performing only the adjustments, the lens block
and boards need not be disassembled.

1) Connect the equipment for adjustments according to Fig. 5-1-

4.

2) Connect the adjustment remote commander to VC-273 board

CN1011 via I/F unit for LANC control (J-6082-521-A) and
CPC jig connector (J-6082-539-A). (Fig. 5-1-3)
To operate the adjustment remote commander, connect the AC
power adaptor to the DC IN jack of I/F unit for LANC control,
or connect the L series Info-LITHIUM battery to the battery
terminal of I/F unit for LANC control.

3) The front panel block (SI-033 board,  video light, microphone

unit) need not be assembled except during the steadyshot op-
eration check.

\

)

[

)

[

[

=