Read Sony DCR-TRV130 / DCR-TRV130E / DCR-TRV230 / DCR-TRV230E / DCR-TRV235E / DCR-TRV325E / DCR-TRV330 / DCR-TRV330E / DCR-TRV430E / DCR-TRV530 / DCR-TRV530E / DCR-TRV725E / DCR-TRV730 / DCR-TRV730E / DCR-TRV828 / DCR-TRV828E / DCR-TRV830 / DCR-TRV830E Service Manual online
— 38 —
5-4-2. Tracking Adjustment (Refer to Fig. 5-6)
1)
Playback the tracking alignment tape WR5-1NP (NTSC), WR5-
1CP (PAL) (Ref. No. J-5).
1CP (PAL) (Ref. No. J-5).
2)
Adjust the No.3 guide until the envelope at the entrance side
waveform becomes flat.
waveform becomes flat.
3)
Adjust the No.6 guide until the envelope at the exit side
waveform becomes flat.
waveform becomes flat.
✩ The TG-3/6 zenith adjustment screws do not need to be adjusted.
5-4-3. No.7 Guide (TG7) Adjustment
(Refer to Fig. 5-7)
1)
Playback the tape and set the REV mode.
2)
Confirm that tape slack does not occur in between the No.6
guide (TG6) 1 and capstan 2. If any tape slack occurs, rotate
the TG7 nut 4 of the No.7 guide (TG7) 3 to remove the tape
slack.
guide (TG6) 1 and capstan 2. If any tape slack occurs, rotate
the TG7 nut 4 of the No.7 guide (TG7) 3 to remove the tape
slack.
3)
Playback the tape again and confirm that tape slack does not
occur between the capstan 2 and No.7 guide (TG7) 3. If the
tape slack occurs exceeding the specifications (specifications:
0.5 mm or less), rotate the TG7 nut 4 to make the tape slack
below the specifications (0.5 mm). When the tape slack between
the No.6 guide (TG6) 1 and capstan 2 is 0.3 mm or less in
the REV mode, it means that the adjustment is completed.
occur between the capstan 2 and No.7 guide (TG7) 3. If the
tape slack occurs exceeding the specifications (specifications:
0.5 mm or less), rotate the TG7 nut 4 to make the tape slack
below the specifications (0.5 mm). When the tape slack between
the No.6 guide (TG6) 1 and capstan 2 is 0.3 mm or less in
the REV mode, it means that the adjustment is completed.
Fig. 5-6
Fig. 5-7
Guide zenith adjustment screw
No.6 guide
(TG6)
(TG6)
No.3 guide
(TG3)
(TG3)
Tape slack
2
Capstan
1
No.6 guide
(TG6)
3
No.7 guide
(TG7)
4
TG7 nut
Click on the first or last page to see other DCR-TRV130 / DCR-TRV130E / DCR-TRV230 / DCR-TRV230E / DCR-TRV235E / DCR-TRV325E / DCR-TRV330 / DCR-TRV330E / DCR-TRV430E / DCR-TRV530 / DCR-TRV530E / DCR-TRV725E / DCR-TRV730 / DCR-TRV730E / DCR-TRV828 / DCR-TRV828E / DCR-TRV830 / DCR-TRV830E service manuals if exist.