Read Sony DCR-TRV130 / DCR-TRV130E / DCR-TRV230 / DCR-TRV230E / DCR-TRV235E / DCR-TRV325E / DCR-TRV330 / DCR-TRV330E / DCR-TRV430E / DCR-TRV530 / DCR-TRV530E / DCR-TRV725E / DCR-TRV730 / DCR-TRV730E / DCR-TRV828 / DCR-TRV828E / DCR-TRV830 / DCR-TRV830E Service Manual online
— 29 —
4-16. LS Guide Roller, Guide Lock Plate (T), Pinch Pusher Assembly, Eject Arm
1. Removal procedure
1)
Remove the LS chassis block assembly. (Refer to 4-11.)
2)
Remove the LS guide roller 1.
3)
Remove the P pressure plate spring 2.
4)
Remove the HLW cut (0.98
×
3
×
0.25) 3.
5)
Remove the pitch pressure plate assembly 4 in the direction
of the arrow A.
of the arrow A.
6)
Remove the relay gear 5.
7)
Remove the screw (camera pan2 M1.4
×
1.6) 6.
8)
Remove the guide lock plate (T) 7 in the direction of the arrow
B
B
.
9)
Remove the eject arm spring 8 and HLW cut (0.98
×
3
×
0.25) 9.
Note: Do not reuse the HLW cut.
10) Remove the eject arm 0.
2. Attachment procedure
1)
Attach the eject arm spring 8 to the eject arm 0.
2)
Hook one end of the eject arm spring 8 on the protrusion of
the main chassis block assembly and attach the eject arm to the
shaft.
the main chassis block assembly and attach the eject arm to the
shaft.
3)
Attach the HLW cut (0.98
×
3
×
0.25) 9.
Do not reuse the HLW cut.
4)
Attach the guide lock plate T 7 while aligning it with the
notches C and D.
notches C and D.
5)
Attach the screw (camera pan2 M1.4
×
1.6) 6.
Tightening torque: 0.078
±
0.01 N•m (0.8
±
0.1 kgf•cm)
6)
Attach the relay gear 5.
7)
Attach the pinch pusher plate 4 with the HLW cut (0.98
×
3
×
0.25) 3.
8)
Attach the P pressure plate spring 2.
Insert the concave side of the LS guide roller 1 into the shaft
to attach the LS guide roller.
Insert the concave side of the LS guide roller 1 into the shaft
to attach the LS guide roller.
Note: Insert the roller completely.
9)
Attach the LS chassis block assembly to the mechanical chassis.
(Refer to 4-11.)
(Refer to 4-11.)
Fig. 4-16
When attaching it, coat the hatched
portion with grease.
portion with grease.
6
Screw
(camera pan 2 main M1.4
×
1.6)
7
Remove the guide lock
plate (T) in the direction
of the arrow B.
of the arrow B.
4
Remove the pinch pressure
plate assembly in the direction
of the arrow A.
of the arrow A.
5
Relay gear
3
HLW cut
(0.98
×
3
×
0.25)
2
P pressure
plate spring
Coat inside with grease too.
Coat inside with grease too.
Concave side
Pinch the rotary switch.
9
HLW cut (Do not reuse)
(0.98
×
3
×
0.25)
8
Eject arm spring
0
Eject arm
1
LS guide roller
Notch C
Notch D
B
A
Click on the first or last page to see other DCR-TRV130 / DCR-TRV130E / DCR-TRV230 / DCR-TRV230E / DCR-TRV235E / DCR-TRV325E / DCR-TRV330 / DCR-TRV330E / DCR-TRV430E / DCR-TRV530 / DCR-TRV530E / DCR-TRV725E / DCR-TRV730 / DCR-TRV730E / DCR-TRV828 / DCR-TRV828E / DCR-TRV830 / DCR-TRV830E service manuals if exist.