Read Sony DCR-TRV130 / DCR-TRV130E / DCR-TRV230 / DCR-TRV230E / DCR-TRV235E / DCR-TRV325E / DCR-TRV330 / DCR-TRV330E / DCR-TRV430E / DCR-TRV530 / DCR-TRV530E / DCR-TRV725E / DCR-TRV730 / DCR-TRV730E / DCR-TRV828 / DCR-TRV828E / DCR-TRV830 / DCR-TRV830E (serv.man3) Service Manual online
2)
Loosen the two screws (M1.7) of the LS cam plate and slide
the LS chassis block assembly to the drum side so as to
remove plate.
the LS chassis block assembly to the drum side so as to
remove plate.
3)
Insert the thickness gauge 0.6 mm (Ref. No. J-15) between
the LS cam plate and the LS chassis block assembly. Push
the LS cam plate in the direction opposite to the drum to
remove plate.
the LS cam plate and the LS chassis block assembly. Push
the LS cam plate in the direction opposite to the drum to
remove plate.
Sony EMCS Co.
2007B1600-1
©2007.02
Published by Kohda TEC
9-929-861-92
CORRECTION-1
Correct your 8mm Video MECHANICAL ADJUSTMENT MANUAL IX as shown below.
Correction of check, adjustment and replacement
Ver. 1.3 2007. 02
Page
4. Check, Adjustment and Replacement
4-9. LS Cam Plate Position Adjustment (LS type A only)
: Corrected portion
INCORRECT
CORRECT
22
8mm Video MECHANICAL ADJUSTMENT MANUAL IX
8mm Video MECHANICAL ADJUSTMENT MANUAL IX
M2000 MECHANISM
1. Adjustment Procedure
2)
Loosen the two screws (M1.7) of the LS cam plate and slide
the LS chassis block assembly to the drum side so as to
remove play.
the LS chassis block assembly to the drum side so as to
remove play.
3)
Insert the thickness gauge 0.6 mm (Ref. No. J-15) between
the LS cam plate and the LS chassis block assembly. Push
the LS cam plate in the direction opposite to the drum to
remove play.
the LS cam plate and the LS chassis block assembly. Push
the LS cam plate in the direction opposite to the drum to
remove play.
1
LS chassis
block assembly
Push the LS chassis
block assembly
to remove play.
block assembly
to remove play.
1
LS chassis
block assembly
Push the LS chassis
block assembly
to remove plate.
block assembly
to remove plate.
Display
