Read Sony DCR-TR8000E / DCR-TR8100E / DCR-TRV120E / DCR-TRV125E (serv.man2) Service Manual online
– 5 –
3.
NOTE FOR REPAIR
Make sure that the flat cable and flexible board are not cracked of
bent at the terminal.
Do not insert the cable insufficiently nor crookedly.
bent at the terminal.
Do not insert the cable insufficiently nor crookedly.
When remove a connector, don’t pull at wire of connector.
Be in danger of the snapping of a wire.
Be in danger of the snapping of a wire.
Cut and remove the part of gilt
which comes off at the point.
(Take care that there are some
pieces of gilt left inside)
which comes off at the point.
(Take care that there are some
pieces of gilt left inside)
When installing a connector, don’t press down at wire of connector.
Be in danger of the snapping of a wire.
Be in danger of the snapping of a wire.
Click on the first or last page to see other DCR-TR8000E / DCR-TR8100E / DCR-TRV120E / DCR-TRV125E (serv.man2) service manuals if exist.