DCR-TR8000E, DCR-TR8100E, DCR-TRV120E, DCR-TRV125E (serv.man2) - Sony Movie Service Manual (repair manual). Page 2

Read Sony DCR-TR8000E / DCR-TR8100E / DCR-TRV120E / DCR-TRV125E (serv.man2) Service Manual online

– 2 –
1. Check the area of your repair for unsoldered or poorly-sol-
dered connections.  Check the entire board surface for solder
splashes and bridges.
2. Check the interboard wiring to ensure that no wires are
“pinched” or contact high-wattage resistors.
3. Look for unauthorized replacement parts, particularly transis-
tors, that were installed during a previous repair.  Point them
out to the customer and recommend their replacement.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
4. Look for parts which, though functioning, show obvious signs
of deterioration.  Point them out to the customer and recom-
mend their replacement.
5. Check the B+ voltage to see it is at the values specified.
6. Flexible Circuit Board Repairing
Keep the temperature of the soldering iron around 270 ˚C
during repairing.
Do not touch the soldering iron on the same conductor of
the circuit board (within 3 times).
Be careful not to apply force on the conductor when sol-
dering or unsoldering.
DCR-TR8000E
100
×
×
×
Table for differences of function
DCR-TRV125E
125
×
a
a
Model
Digital zoom
MONITOR IN
LCD
DCR-TRV120E
100
×
a
a
DCR-TR8100E
125
×
×
×
SAFETY-RELATED  COMPONENT  WARNING!!
COMPONENTS  IDENTIFIED  BY  MARK  
0
  OR  DOTTED
LINE  WITH  MARK  
0
  ON  THE  SCHEMATIC  DIAGRAMS
AND  IN  THE  PARTS  LIST  ARE  CRITICAL  TO  SAFE
OPERATION.  REPLACE  THESE  COMPONENTS  WITH
SONY  PARTS  WHOSE  PART  NUMBERS  APPEAR  AS
SHOWN  IN  THIS  MANUAL  OR  IN  SUPPLEMENTS  PUB-
LISHED  BY  SONY.
Page of 51
Display

Click on the first or last page to see other DCR-TR8000E / DCR-TR8100E / DCR-TRV120E / DCR-TRV125E (serv.man2) service manuals if exist.