Read Sony DCR-TR8000E / DCR-TR8100E / DCR-TRV120 / DCR-TRV120E / DCR-TRV120P / DCR-TRV125E Service Manual online
5-25
1-4-2. Centering Adjustment
Mode
Playback
Signal
Hi8/standard 8 mm alignment tape :
For checking operation
(WR5-8NSE(NTSC))
(WR5-8CSE(PAL))
Monoscope section
For checking operation
(WR5-8NSE(NTSC))
(WR5-8CSE(PAL))
Monoscope section
Specified Value
± 4%
Adjustment method:
1)
1)
Use the centering adjustment ring and adjust so that the left,
light, top, and bottom sides of the display are uniform. (Refer
to Fig. 5-1-14)
light, top, and bottom sides of the display are uniform. (Refer
to Fig. 5-1-14)
Note:
As the centering position changes due to earth
magnetism, rotate it 360
magnetism, rotate it 360
°
in the horizontal direction,
and adjust with the center section of the modifying
position.
position.
1-4-3. Focus Adjustment
Mode
Playback
Signal
Hi8/standard 8 mm alignment tape :
For checking operation
(WR5-8NSE(NTSC))
(WR5-8CSE(PAL))
Monoscope section
For checking operation
(WR5-8NSE(NTSC))
(WR5-8CSE(PAL))
Monoscope section
Adjustment method:
1)
1)
Adjust the focus ring to obtain the optimum focus. (Refer to
Fig. 5-1-14)
Fig. 5-1-14)
1-4.
MONOCHROME ELECTRONIC
VIEWFINEDER SYSTEM ADJUSTMENTS
VIEWFINEDER SYSTEM ADJUSTMENTS
Note:
NTSC model: DCR-TRV120/TRV120P
PAL model: DCR-TRV120E/TRV125E/TR8000E/TR8100E
PAL model: DCR-TRV120E/TRV125E/TR8000E/TR8100E
1-4-1. Horizontal Slant Check
Mode
Playback
Signal
Hi8/standard 8 mm alignment tape :
For checking operation
(WR5-8NSE(NTSC))
(WR5-8CSE(PAL))
Monoscope section
For checking operation
(WR5-8NSE(NTSC))
(WR5-8CSE(PAL))
Monoscope section
Specified Value
± 1.5
°
Adjustment method:
1)
1)
Adjust RV904 (BRIGHT) (VF-129 board) so that the CRT can
be seen easily and clearly.
be seen easily and clearly.
2)
Check that the difference between the horizontal line and the
tilt of black mask satisfies the specified value.
tilt of black mask satisfies the specified value.
Holizontal line
Specified value : The image should be within
±
1.5
°
of the holizontal line.
θ
θ
±
1.5
°
±
4%
±
4%
Adjustment value :
±
4%
Focus adjustment
Aberration adjustment
DY tightening screw
Centering adjustment
Fig. 5-1-14
Fig. 5-1-15
Fig. 5-1-16
VF-129 BOARD
RV903
C909
CN902
IC901
F.B.T
W901
RV904
SOL901
Click on the first or last page to see other DCR-TR8000E / DCR-TR8100E / DCR-TRV120 / DCR-TRV120E / DCR-TRV120P / DCR-TRV125E service manuals if exist.