Read Sony DCR-PC53E / DCR-PC55 / DCR-PC55E (serv.man4) Service Manual online
6-39
DCR-PC53E/PC55/PC55E
3-1-3.
Adjusting Connectors
The measuring point of the playback RF signal is CN8505 of CR-
049 board. After removing the microphone unit, connect the mea-
suring instruments via the CPC connecting jigs (J-6082-521-A, J-
6082-564-A). Refer to “MECHANISM SECTION ADJUST-
MENT” for the measuring method. The following table lists the pin
numbers and signal names of CN8505.
049 board. After removing the microphone unit, connect the mea-
suring instruments via the CPC connecting jigs (J-6082-521-A, J-
6082-564-A). Refer to “MECHANISM SECTION ADJUST-
MENT” for the measuring method. The following table lists the pin
numbers and signal names of CN8505.
CN8505 of CR-049 board
Table 6-3-1.
3-1-4.
Connecting the Equipment
Connect the measuring instruments as shown in Fig. 6-3-2, and
perform the adjustments.
perform the adjustments.
Pin No.
Signal Name
1
MIC GND
2
INT MIC R
3
MIC GND
4
INT MIC L
5
MIC GND
6
MIC GND
7
SWP
8
RF
Adjustment
remote
commander
Main unit
A/V jack
TV monitor
VIDEO
(Yellow)
(Yellow)
LANC
AUDIO L (White)
AUDIO R (Red)
Fig. 6-3-1.
Fig. 6-3-2.
Click on the first or last page to see other DCR-PC53E / DCR-PC55 / DCR-PC55E (serv.man4) service manuals if exist.