Read Sony DCR-PC2E / DCR-PC3 / DCR-PC3E Service Manual online
5-30
4. White Balance Adjustment (VC-220 board)
Correct the white balance.
If deviated, the reproduction of the EVF screen may degenerate.
If deviated, the reproduction of the EVF screen may degenerate.
Mode
Camera
Subject
Arbitrary
Measurement Point
Check on EVF screen
Measuring Instrument
Adjustment Page
D
Adjustment Address
71, 72
Specified Value
The EVF screen should not be colored.
Adjusting method:
1)
1)
Select page: 0, address: 01, and set data: 01.
2)
Select page: 3, address: 0C, set data: 60, and press the PAUSE
button of the adjustment remote commander.
button of the adjustment remote commander.
3)
Select page: 3, address: 22, set data: 0B, and press the PAUSE
button.
button.
4)
Select page: D, address: 71 and 72, set the data to the initial
value.
value.
Note:
Press the PAUSE button each time to set the data.
5)
Check that the EVF screen is not colored. If colored, change
the data of page: D, address: 71 and 72 so that the EVF screen
is not colored.
the data of page: D, address: 71 and 72 so that the EVF screen
is not colored.
Note:
To write in the non-volatile memory (EEPROM), press the
PAUSE button each time to set the data.
PAUSE button each time to set the data.
6)
Select page: 3, address: 22, set data: 00, and press the PAUSE
button.
button.
7)
Select page: 3, address: 0C, set data: 00, and press the PAUSE
button.
button.
8)
Select page: 0, address: 01, and set data: 00.
Address
71
72
Data
80
80
Click on the first or last page to see other DCR-PC2E / DCR-PC3 / DCR-PC3E service manuals if exist.