Read Sony DCR-PC103E / DCR-PC104E / DCR-PC105 / DCR-PC105E (serv.man4) Service Manual online
6-64
DCR-PC103E/PC104E/PC105/PC105E
11. Record of Self-diagnosis check
Page 7
Address B0 to C6
Note1:
This data will be kept even if the lithium battery (LI-070 board
BT6401 of the cabinet (R) assembly) is removed.
BT6401 of the cabinet (R) assembly) is removed.
Note2:
The data of page: 0, address: 10 must be “00”.
Address
Self-diagnosis code
B0
“Repaired by” code (Occurred 1st time) *1
B1
“Block function” code (Occurred 1st time)
B2
“Detailed” code (Occurred 1st time)
B4
“Repaired by” code (Occurred 2nd time) *1
B5
“Block function” code (Occurred 2nd time)
B6
“Detailed” code (Occurred 2nd time)
B8
“Repaired by” code (Occurred 3rd time) *1
B9
“Block function” code (Occurred 3rd time)
BA
“Detailed” code (Occurred 3rd time)
BC
“Repaired by” code (Occurred 4th time) *1
BD
“Block function” code (Occurred 4th time)
BE
“Detailed” code (Occurred 4th time)
C0
“Repaired by” code (Occurred 5th time) *1
C1
“Block function” code (Occurred 5th time)
C2
“Detailed” code (Occurred 5th time)
C4
“Repaired by” code (Occurred the last time) *1
C5
“Block function” code (Occurred the last time)
C6
“Detailed” code (Occurred the last time)
*1: “01”
t “C”, “03” t “E”
Using method:
1)
1)
The past self-diagnosis codes are displayed at addresses: BC
to C6.
Refer to “SELF-DIAGNOSIS FUNCTION” for detail of the
self-diagnosis code except for the code being written in the
following table.
to C6.
Refer to “SELF-DIAGNOSIS FUNCTION” for detail of the
self-diagnosis code except for the code being written in the
following table.
Repaired by:
E
Block
Function
Function
20
Detailed
Code
Code
00
Symptom/State
Data on A page or D page are
rewritten.
rewritten.
Correction
Make data on A page and D
page correct value.
page correct value.
Self-diagnosis Code
Note3:
When the flash error code (E : 91 :
**
) is displayed. After repair, clear the error flag in the following method.
1) Select page: 7, address: 00, set data: 80.
2) Select page: 7, address: 01, set data: 80 and press the PAUSE buttun.
3) Check that the data of page: 7, address: 02 is “01”.
2) Select page: 7, address: 01, set data: 80 and press the PAUSE buttun.
3) Check that the data of page: 7, address: 02 is “01”.
Click on the first or last page to see other DCR-PC103E / DCR-PC104E / DCR-PC105 / DCR-PC105E (serv.man4) service manuals if exist.