Read Sony DCR-PC100E Service Manual online
— 13 —
2-8.
CCD/CD BLOCK ASSEMBLY, MF RING ASSEMBLY
2-9.
VF-138 BOARD, VF HOLDER ASSEMBLY, EYE CUP ASSEMBLY
1
Tapping screw
(M1.7
×
4)
1
Tapping screw (M1.7
×
4)
2
Remove the two claws
Be careful not to damage the
flexible board to be removed
at step
flexible board to be removed
at step
3
.
3
Remove the claw
4
MF ring block
assembly
5
Two tapping
screws (B1.7
×
6)
9
Two tapping
screws (M1.7
×
4)
q;
Lens frame
qa
Lens device
(LSV-660A)
6
CCD/CD block assembly
Never remove the CCD imager
(IC101) from the CD-234 board
because position alignment
between the CCD imager and
the CD-234 board is difficult.
(IC101) from the CD-234 board
because position alignment
between the CCD imager and
the CD-234 board is difficult.
7
Seal rubber (W)
8
Optical filter block
4
Tapping screw
(M1.7
×
4)
3
Flexible board
(from lens device) (33P)
2
CD heat sink/
CD insulating sheet/
CD heat transfer sheet
CD heat transfer sheet
[REMOVING THE
MF RING BLOCK ASSEMBLY]
MF RING BLOCK ASSEMBLY]
2
1
Two tapping
screws (B1.7)
1
VF blind sheet
2
Remove the
three claws
5
Light guide plate
block (6P)
6
LCD (LCX027AK-J)
(16P)
qs
LCD (LCX027AK-J)
qd
LCD cushion (1)
qf
VF holder assembly
3
Remove the
four claws
4
Remove the
two claws
9
Remove the
four claws
q;
VF holder lid
qa
Cushion (2)
7
VF-138 board
8
Cushion (3)
3
VF window
5
Eye cup assembly
4
VF spacer
[REMOVING THE EYE CUP ASSEMBLY]
Click on the first or last page to see other DCR-PC100E service manuals if exist.