DCR-PC100, DCR-PC100E (serv.man2) - Sony Movie Service Manual (repair manual). Page 125

5-22

For detecting the position of the lens iris and ND filter, adjust each
AMP gain and offset.

Subject

Not required

Measurement Point

Display data of page 1 (Note1)

Measuring Instrument

Adjustment remote commander

Adjustment Page

F

Adjustment Address

17, 18, 19, 1A, 1B, 1C

Specified Value

When the data of page: 6, address: 01
is “01”: 15 to 19 (Note2)
When the data of page: 6, address: 01
is “03”: 87 to 8B (Note2)
When the data of page: 6, address: 01
is “69”: 87 to 8B (Note2)
When the data of page: 6, address: 01
is “6B”: 15 to 19 (Note2)

Displayed data of page 1 of the adjustment remote commander.

1 : 00 : XX

Display data

The PAUSE button of the Adjustment remote commander must be
pressed.

POWER .................................................................. CAMERA

Adjusting method:
1)

Select page: 0, address: 01, and set data: 01.

2)

Select page: 6, address: 94, and set data: 17.

3)

Select page: 6, address: 95, and set data: 89.

4)

Select page: 6, address: 01, set data: 6D, and press the PAUSE
button of the adjustment remote commander. (The HALL
adjustment is performed and the adjustment data is stored in
page: F, address: 17 to 1C.)

5)

Select page: 6, address: 02, and check that the data is “01”.

6)

Select page: 6, address: 01, set data: 00, and press the PAUSE
button.

Checking method:
1)

Select page: 0, address: 01, and set data: 01.

2)

Select page: F, address: 10, set data: 39, and press the PAUSE
button.

3)

Select page: 6, address: 01, set data: 01, and press the PAUSE
button.

4)

Select page: 1, and check that the display data (Note1) satisfies
the specified value.

5)

Select page: 6, address: 01, set data: 03, and press the PAUSE
button.

6)

Select page: 1, and check that the display data (Note1) satisfies
the specified value.

7)

Select page: F, address: 10, set data: 43, and press the PAUSE
button.

8)

Select page: 6, address: 01, set data: 69, and press the PAUSE
button.

9)

Select page: 1, and check that the display data (Note1) satisfies
the specified value.

10) Select page: 6, address: 01, set data: 6B, and press the PAUSE

button.

11) Select page: 1, and check that the display data (Note1) satisfies

the specified value.

Processing after Completing Adjustments:
1)

Select page: F, address: 10, set data: 00, and press the PAUSE
button.

2)

Select page: 6, address: 01, set data: 00, and press the PAUSE
button.

3)

Select page: 6, address: 94, and set data: 00.

4)

Select page: 6, address: 95, and set data: 00.

5)

Select page: 0, address: 01, and set data: 00.

The MR (Magnet resistor) adjustment of the inner focus lens is
carried out automatically. In whichever case, the focus will be
deviated during auto focusing/manual focusing.

Subject

Not required

Measurement Point

Adjustment remote commander

Measuring Instrument

Adjustment Page

F

Adjustment Address

50 to 59, 62

Specified Value

The data of page: F, address: 50 is
“40” to “C0”
The data of page: F, address: 51 is
“40” to “C0”

Make the lens horizontal and perform this adjustment.

POWER .................................................................. CAMERA

Adjusting method:
1)

Select page: 0, address: 01, and set data: 01.

2)

Select page: 6, address: 01, set data: BD, and press the PAUSE
button of the adjustment remote commander. (The MR
adjustment is performed and the adjustment data is stored in
page: F, address: 50 to 59, 62.)

3)

Select page: 6, address: 02, and check that the data is “01”.

4)

Select page: F, address: 50, and check that the data satisfies the
specified value.

5)

Select page: F, address: 51, and check that the data satisfies the
specified value.

Processing after Completing Adjustments:
1)

Select page: 6, address: 01, set data: 00, and press the PAUSE
button.

2)

Select page: 0, address: 01, set data: 00.

3)

Turn off the power and turn on again.

4)

Perform “Flange Back Adjustment”.