Read Sony DCR-IP45 / DCR-IP45E / DCR-IP55 / DCR-IP55E (serv.man3) Service Manual online
SERVICE MANUAL
• INSTRUCTION MANUAL is shown at the end of this document.
Revision History
Revision History
Ver 1.2 2003. 05
LEVEL
1
Link
SELF DIAGNOSIS FUNCTION
ORNAMENTAL PARTS
SPECIFICATIONS
SELF DIAGNOSIS FUNCTION
ORNAMENTAL PARTS
SPECIFICATIONS
Link
DCR-IP45/IP45E/IP55/IP55E
RMT-817
US Model
Canadian Model
DCR-IP55
AEP Model
East European Model
DCR-IP45E/IP55E
E Model
DCR-IP45/IP45E/IP55/IP55E
Hong Kong Model
DCR-IP45/IP55E
Tourist Model
DCR-IP45/IP45E
UK Model
Australian Model
DCR-IP55E
Chinese Model
DCR-IP45E
Korea Model
DCR-IP45
V MECHANISM
DIGITAL VIDEO CAMERA RECORDER
Photo: DCR-IP55
— 2 —
DCR-IP45/IP45E/IP55/IP55E
SPECIFICATIONS
COVER
COVER
Video camera
recorder
recorder
System
Video recording system
2 rotary heads
2 rotary heads
DCR-IP45/IP55:
NTSC color, EIA standards
DCR-IP45E/IP55E:
NTSC color, EIA standards
DCR-IP45E/IP55E:
Helical scanning system
Audio recording system
MPEG1 Audio Layer2 (Fs 48 kHz,
stereo)
Video signal
Audio recording system
MPEG1 Audio Layer2 (Fs 48 kHz,
stereo)
Video signal
PAL colour, CCIR standards
Usable cassette
MICROMV cassette with the
mark printed
Tape speed
Approx. 5.66 mm/s
Recording/playback time
(using cassette MGR60)
one hour
Fastforward/rewind time
(using cassette MGR60)
Approx. one min. and 30 seconds
Viewfinder
Electric viewfinder (colour)
Image device
3.8 mm (1/4.7 type) CCD
(Charge Coupled Device)
Gross: Approx. 1 070 000 pixels
Effective (still): Approx. 1 000 000
pixels
Effective (moving): Approx. 690 000
pixels
Lens
Carl Zeiss
Combined power zoom lens
Filter diameter 30 mm. (1 3/16 in.)
10
Usable cassette
MICROMV cassette with the
mark printed
Tape speed
Approx. 5.66 mm/s
Recording/playback time
(using cassette MGR60)
one hour
Fastforward/rewind time
(using cassette MGR60)
Approx. one min. and 30 seconds
Viewfinder
Electric viewfinder (colour)
Image device
3.8 mm (1/4.7 type) CCD
(Charge Coupled Device)
Gross: Approx. 1 070 000 pixels
Effective (still): Approx. 1 000 000
pixels
Effective (moving): Approx. 690 000
pixels
Lens
Carl Zeiss
Combined power zoom lens
Filter diameter 30 mm. (1 3/16 in.)
10
× (Optical), 120 × (Digital)
Focal length
3.7 - 37 mm (5/32 - 1 1/2 in.)
When converted to a 35 mm still
camera
CAMERA:
50 - 500 mm (2 - 19 3/4 in.)
MEMORY/NETWORK
(DCR-IP55/IP55E):
42 - 420 mm (1 11/16 - 16 5/8 in.)
3.7 - 37 mm (5/32 - 1 1/2 in.)
When converted to a 35 mm still
camera
CAMERA:
50 - 500 mm (2 - 19 3/4 in.)
MEMORY/NETWORK
(DCR-IP55/IP55E):
42 - 420 mm (1 11/16 - 16 5/8 in.)
Colour temperature
Auto, HOLD (Hold), nIndoor
(3 200K),
Auto, HOLD (Hold), nIndoor
(3 200K),
Outdoor (5 800K)
Minimum illumination
7 lx (lux) (F 1.8)
0 lx (lux) (in the NightShot mode)*
* Objects unable to be seen due to
7 lx (lux) (F 1.8)
0 lx (lux) (in the NightShot mode)*
* Objects unable to be seen due to
the dark can be shot with infrared
lighting.
lighting.
Input/Output connectors
Audio/Video input/output
10-pin connector
Input/output auto switch
Video signal: 1 Vp-p, 75
10-pin connector
Input/output auto switch
Video signal: 1 Vp-p, 75
Ω (ohms),
unbalanced, sync negative
Luminance signal: 1 Vp-p, 75
Luminance signal: 1 Vp-p, 75
Ω
(ohms), unbalanced
Chrominance signal: 0.3 Vp-p, 75
Chrominance signal: 0.3 Vp-p, 75
Ω
(ohms), unbalanced
Audio signal: 327 mV, (at output
impedance more than 47 k
Audio signal: 327 mV, (at output
impedance more than 47 k
Ω
(kilohms) )
Input impedance with more than
47 k
Input impedance with more than
47 k
Ω (kilohms)
Output impedance with less than
2.2 k
2.2 k
Ω (kilohms)
i.LINK (MICROMV Interface)
input/output
4-pin connector S400
LANC jack
Stereo mini-minijack (Ø 2.5 mm)
USB jack
mini-B
input/output
4-pin connector S400
LANC jack
Stereo mini-minijack (Ø 2.5 mm)
USB jack
mini-B
LCD screen
Picture
6.2 cm (2.5 type)
50
6.2 cm (2.5 type)
50
× 37 mm (2 × 1 1/2 in.)
Total dot number:
211 200 (960
211 200 (960
× 220)
Wireless communication
(DCR-IP55/IP55E only)
(DCR-IP55/IP55E only)
Communication system
Bluetooth specification Ver. 1.1
Maximum communication
speed
Bluetooth specification Ver. 1.1
Maximum communication
speed
1) 2)
Approx. 723 kbps
Maximum output
Bluetooth specification Power
Class2
Maximum output
Bluetooth specification Power
Class2
Communication distance
2)
Approx. 10 m (33 feet) (Open space,
when using a Sony BTA-NW1/
NW1A Modem Adaptor with
Bluetooth Function)
Compatible Bluetooth profiles
when using a Sony BTA-NW1/
NW1A Modem Adaptor with
Bluetooth Function)
Compatible Bluetooth profiles
3)
Generic Access Profile
Dial-up Networking Profile
Usable frequency band
2.4 GHz band
(2.400 – 2.483 5 GHz)
Dial-up Networking Profile
Usable frequency band
2.4 GHz band
(2.400 – 2.483 5 GHz)
1) The maximum rate defined by
Bluetooth specification Ver. 1.1
2) Depends on obstacles between
the Bluetooth devices, radio wave
conditions, etc.
conditions, etc.
3) Defined by Bluetooth
specification for intended use
between the Bluetooth devices
between the Bluetooth devices
General
Power requirements
7.2 V (battery pack)
8.4 V (AC power adaptor)
Average power consumption
(when using the battery pack)
During camera recording using
LCD: 4.4 W
Viewfinder: 3.8 W
Operating temperature
0
7.2 V (battery pack)
8.4 V (AC power adaptor)
Average power consumption
(when using the battery pack)
During camera recording using
LCD: 4.4 W
Viewfinder: 3.8 W
Operating temperature
0
°C to 40 °C (32 °F to 104°F)
Storage temperature
–20
–20
°C to +60 °C (–4 °F to +140 °F)
Dimensions (approx.)
60
60
× 73 × 128.5 mm
(2 3/8
× 2 7/8 × 5 1/8 in.) (w/h/d)
Mass (approx.)
435 g (15 oz)
excluding the battery pack and
cassette
480 g (1 lb 0 oz)
including the battery pack,
NP-FF50, cassette MGR60, lens cap
and wrist strap
Supplied accessories
See page 3.
435 g (15 oz)
excluding the battery pack and
cassette
480 g (1 lb 0 oz)
including the battery pack,
NP-FF50, cassette MGR60, lens cap
and wrist strap
Supplied accessories
See page 3.
AC power adaptor
Power requirements
100 - 240 V AC, 50/60 Hz
Power consumption
23 W
Output voltage
DC OUT: 8.4 V, 1.5 A in the
operating mode
Operating temperature
0
100 - 240 V AC, 50/60 Hz
Power consumption
23 W
Output voltage
DC OUT: 8.4 V, 1.5 A in the
operating mode
Operating temperature
0
°C to 40 °C (32 °F to 104 °F)
Storage temperature
–20
–20
°C to +60 °C (–4 °F to +140 °F)
Dimensions (approx.)
125
125
× 39 × 62 mm (5 × 1 9/16 ×2 1/2
in.) (w/h/d) excluding projecting
parts
Mass (approx.)
280 g (9.8 oz)
excluding power cord
parts
Mass (approx.)
280 g (9.8 oz)
excluding power cord
Battery pack
Maximum output voltage
DC 8.4 V
Output voltage
DC 7.2 V
Capacity
4.8 Wh (675 mAh)
Operating temperature
0
DC 8.4 V
Output voltage
DC 7.2 V
Capacity
4.8 Wh (675 mAh)
Operating temperature
0
°C to 40°C (32°F to 104°F)
Dimensions (approx.)
40.8
40.8
× 12.5 × 49.1 mm
(1 5/8
× 1/2 × 1 15/16 in.)
(w/h/d)
Mass (approx.)
45 g (1.6 oz)
Type
Lithium ion
Mass (approx.)
45 g (1.6 oz)
Type
Lithium ion
“Memory Stick”
Memory
Flash memory
8MB: MSA-8A
Operating voltage
2.7-3.6V
Power consumption
Approx. 45mA in the operating
mode
Approx. 130
Flash memory
8MB: MSA-8A
Operating voltage
2.7-3.6V
Power consumption
Approx. 45mA in the operating
mode
Approx. 130
µA in the standby
mode
Dimensions (approx.)
50
Dimensions (approx.)
50
× 2.8 × 21.5 mm
(2
× 1/8 × 7/8 in.) (w/h/d)
Mass (approx.)
4 g (0.14 oz)
4 g (0.14 oz)
Design and specifications are
subject to change without notice.
subject to change without notice.
CAUTION :
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK
0
OR DOTTED LINE WITH
MARK
0
ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE
0
SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
— 3 —
DCR-IP45/IP45E/IP55/IP55E
Checking supplied accessories.
Other accessories
3-075-459-11 MANUAL, INSTRUCTION (ENGLISH)(IP45:E,HK,JE/IP55)
3-075-459-21 MANUAL, INSTRUCTION (FRENCH)(IP55:CND)
3-075-459-31 MANUAL, INSTRUCTION(SPANISH/PORTUGUESE)
3-075-459-21 MANUAL, INSTRUCTION (FRENCH)(IP55:CND)
3-075-459-31 MANUAL, INSTRUCTION(SPANISH/PORTUGUESE)
(IP45:E,JE/IP55:E)
3-075-459-41 MANUAL, INSTRUCTION (CHINESE)(IP45:E,HK/IP55:E)
3-075-459-51 MANUAL, INSTRUCTION (ARABIC)(IP45:E/IP55:E)
3-075-459-51 MANUAL, INSTRUCTION (ARABIC)(IP45:E/IP55:E)
3-075-459-61 MANUAL, INSTRUCTION (KOREAN)(IP45:JE,KR)
3-075-460-11 MANUAL, INSTRUCTION (ENGLISH/RUSSIAN)
3-075-460-11 MANUAL, INSTRUCTION (ENGLISH/RUSSIAN)
(IP45E:E,CH,JE/IP55E:UK,E,HK,AUS)
3-075-460-21 MANUAL, INSTRUCTION (FRENCH/GERMAN)
(IP45E:E,JE/IP55E:AEP,E)
3-075-460-31 MANUAL, INSTRUCTION
(SPANISH/PORTUGUESE)(IP45E:AEP/IP55E:AEP)
3-075-460-41 MANUAL, INSTRUCTION (CHINESE)(IP55E:HK)
3-075-460-51 MANUAL, INSTRUCTION (ARABIC/PERSIAN)
(IP45E:E/IP55E:E)
3-075-460-61 MANUAL, INSTRUCTION (ITALIAN/GREEK)(IP45E:AEP)
3-075-460-71 MANUAL, INSTRUCTION (CHINESE)
3-075-460-71 MANUAL, INSTRUCTION (CHINESE)
(IP45E:E,CH,JE/IP55E:E)
3-075-460-81 MANUAL, INSTRUCTION (ENGLISH/DUTCH)(IP55E:AEP)
Make sure that the following accessories are supplied with your camcorder.
Power cord (Main lead)(1)
(AUS model)
(AUS model)
0
1-696-819-11
Power cord (Main lead)(1)
(E, AEP, EE model)
(E, AEP, EE model)
0
1-769-608-11
Power cord (Main lead)(1)
(KR model)
(KR model)
0
1-776-985-11
Power cord (Main lead)(1)
(CH model)
(CH model)
0
1-782-476-11
Power cord (Main lead)(1)
(HK, UK model)
(HK, UK model)
0
1-783-374-11
Power cord (Main lead)(1)
(US, CND model)
(US, CND model)
0
1-790-107-22
Power cord (Main lead)(1)
(JE model)
(JE model)
0
1-790-732-11
AC power adaptor (1) (AC-L20)
(US, CND, E, HK, JE, AEP, EE,
UK, AUS model)
(US, CND, E, HK, JE, AEP, EE,
UK, AUS model)
0
1-476-779-13
AC power adaptor (1) (AC-L20)
(KR model)
(KR model)
0
1-476-779-22
AC power adaptor (1) (AC-L20)
(CH model)
(CH model)
0
1-476-779-33
R6 (size AA) batteries
for the Remote
Commander (2)
(not supplied)
for the Remote
Commander (2)
(not supplied)
21-pin adaptor (1)
(AEP, UK, EE model)
1-573-291-11
(AEP, UK, EE model)
1-573-291-11
Lens cap (1)
X-3952-518-1
(IP45E:AEP,EE/IP55:US/
IP55E:AEP,UK,EE)
X-3952-518-1
(IP45E:AEP,EE/IP55:US/
IP55E:AEP,UK,EE)
A/V connecting cable
(1.5m) (1)
1-823-156-11
(1.5m) (1)
1-823-156-11
NP-FF50 battery pack (1)
(not supplied)
(not supplied)
Cleaning cloth (1)
3-073-861-01
3-073-861-01
Wireless Remote
Commander (1)
(RMT-817)
1-476-815-21
Commander (1)
(RMT-817)
1-476-815-21
String (1)
X-3952-519-1
X-3952-519-1
“Memory Stick” (1)
(MSA-8A)
A-7024-735-A
(MSA-8A)
A-7024-735-A
USB cable (1)
1-757-294-21
1-757-294-21
CD-ROM
(SPVD-008 USB Driver) (1)
(IP45/IP45E/IP55:E/IP55E)
3-072-414-01
CD-ROM
(SPVD-008(I) USB Driver) (1)
(IP55:CND model)
3-072-654-01
(SPVD-008 USB Driver) (1)
(IP45/IP45E/IP55:E/IP55E)
3-072-414-01
CD-ROM
(SPVD-008(I) USB Driver) (1)
(IP55:CND model)
3-072-654-01
CD-ROM
(MovieShaker Ver.3.1
for MICROMV) (1)
3-070-810-01
(MovieShaker Ver.3.1
for MICROMV) (1)
3-070-810-01
Battery terminal cover (1)
3-070-945-01
3-070-945-01
Stylus (1)
(DCR-IP55/IP55E
only)
3-073-941-01
(DCR-IP55/IP55E
only)
3-073-941-01
2-pin conversion adaptor (1)
(JE model)
1-569-007-11
(JE model)
1-569-007-11
2-pin conversion adaptor (1)
(E, HK model)
1-569-008-21
(E, HK model)
1-569-008-21
•
Abbreviation
CND : Canadian model
AUS : Australian model
EE
CND : Canadian model
AUS : Australian model
EE
: East European model
KR
: Korea model
CH
: Chinese model
HK
: Hong Kong model
JE
: Tourist model
3-075-396-11 MANUAL, NETWORK INSTRUCTION
(ENGLISH/FRENCH)(IP55/IP55E:E,HK,AUS)
3-075-396-21 MANUAL, NETWORK INSTRUCTION(ENGLISH)(IP55E:UK)
3-075-396-31 MANUAL, NETWORK INSTRUCTION
3-075-396-31 MANUAL, NETWORK INSTRUCTION
(ENGLISH/DUTCH)(IP55E:AEP)
3-075-396-41 MANUAL, NETWORK INSTRUCTION
(FRENCH/GERMAN)(IP55E:AEP)
3-075-396-51 MANUAL, NETWORK INSTRUCTION
(ITALIAN/GREEK)(P55E:AEP)
3-075-396-61 MANUAL, NETWORK INSTRUCTION
(SPANISH/PORTUGUESE)(IP55E:AEP)
3-075-396-71 MANUAL, NETWORK INSTRUCTION (CHINESE)
(IP55:E/IP55E:HK)
3-075-396-81 MANUAL, NETWORK INSTRUCTION (CHINESE)(IP55E:E)
Note :
The components identified by
mark
The components identified by
mark
0
or dotted line with mark
0
are critical for safety.
Replace only with part number
specified.
specified.
Note :
Les composants identifiés par
une marque
Les composants identifiés par
une marque
0
sont critiques
pour la sécurité.
Ne les remplacer que par une
pièce portant le numéro spécifié.
Ne les remplacer que par une
pièce portant le numéro spécifié.
Ver 1.2 2003. 05
— 4 —
DCR-IP45/IP45E/IP55/IP55E
1.
Check the area of your repair for unsoldered or poorly-soldered
connections. Check the entire board surface for solder splashes
and bridges.
connections. Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
4.
Look for parts which, through functioning, show obvious signs
of deterioration. Point them out to the customer and
recommend their replacement.
of deterioration. Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270˚C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.