DCR-IP210, DCR-IP210E, DCR-IP220, DCR-IP220E (serv.man4) - Sony Movie Service Manual (repair manual). Page 11

6-8

Unless otherwise specified, set the switches as follows and perform adjustments without loading cassette.

1.

POWER (PW-2980 block) ..................................... CAMERA

2.

FOCUS (FP-539 flexible) ..................................... MANUAL

3.

NIGHT SHOT (FP-538 flexible) ..................................... OFF

4.

BACK LIGHT (FP-524 flexible) ..................................... OFF

5.

FUNCTION settings (Touch panel)

EXPOSURE ................................................................ OFF
MANUAL SET of the MENU settings

PROGRAM AE ................................................ AUTO
PICTURE EFFECT .............................................. OFF
WHITE BALANCE .......................................... AUTO
AUTO SHUTTER ................................................ OFF

CAMERA SET of the MENU settings

DIGITAL ZOOM .................................................. OFF
16:9 WIDE ............................................................ OFF
STEADY SHOT ................................................... OFF

SETUP MENU of the MENU settings

DEMO MODE ...................................................... OFF

DIGITAL EFFECT ..................................................... OFF

Basically carry out adjustments in the order given.

Fig. 6-1-4.

1)

Color bar chart (Color reproduction adjustment frame)
When performing adjustments using the color bar chart, adjust
the picture frame as shown in Fig. 6-1-4. (Color reproduction
adjustment frame)

2)

Clear chart (Color reproduction adjustment frame)
Remove the color bar chart from the pattern box and insert a
clear chart in its place. (Do not perform zoom operations during
this time.)

3)

Flange back adjustment chart
Make the chart shown in Fig. 6-1-5. using A0 size (1189mm 

×

841mm) black and white vellum paper.

Fig. 6-1-5.

Use matte vellum paper bigger than A0, and make sure the edges of
the black and white paper joined together are not rough.

Fig. a

(Video output terminal

output waveform)

Fig. b (TV monitor picture)

Adjust the camera zoom and direction to
obtain the output waveform shown in Fig. a
and the TV monitor display shown in Fig. b.