DCR-IP1, DCR-IP1E (serv.man4) - Sony Movie Service Manual (repair manual). Page 60

6-57

0010=2

01

1
1=7

 

← 

UNLOAD

Lock released
Cassette compartment

Pinch roller pressing

LS chassis 
movement 
section

EJECT

BL

001

1=3

01

1
1=7

USE

BL

0001=1

01

1
1=7

LSE

BL

0101=5

01

1
1=7

STOP

BL

0100=4

PB

LOAD 

←

Fixed at

←

A

←

B

←

C (LSB) 

0

EJECT

BL

USE

LSE

STOP

PB

2

7

3

1

5

4

Position at which the cassette compartment lock is released, at the farthest unload side
mechanically at which the mechanism can move no further in the UNLOAD direction.

BLANK code, at the boundary between codes. The mechanism will not be stopped by this code
while it is operating. (Except LOAD/UNLOAD)

EJECT completion position. When the cassette is ejected, the mechanism will stop at this position.
Cassette IN standby. The guide will start protruding out as the mechanism moves towards the
LOAD position.

LS chassis loading completion position.

Stop position in the loading state. The pinch roller separates, the tension regulator return, and the
brake is imposed on both reels.

PB, REC, CUE, PAUSE, FF, REW, REVIEW positions. The pinch roller is pressed, and the
tension regulator is ON.

MSW when errors occur:
Information on MSW (mode SW) when errors occur
MSW when movement starts:
 Information on MSW when movements starts when the mechanism position is moved (When the L motor is moved)
MSW of target of movement:
 Information on target MSW of movement when the mechanism position is moved