Read Sony DCR-IP1 / DCR-IP1E (serv.man2) Service Manual online
DCR-IP1/IP1E
2-3
2-4
[SERVICE POSITION TO CHECK THE VTR SECTION]
VC-333 board
IF-108 board
IF-108 board
FP-732
flexible board
FP-722
flexible board
Cabinet R block assembly
Lens block assembly
CN107 (No Mount)
CPC
CPC
Mechanism deck
To eject the cassette, short the circuit between
Pin
Pin
0
and between Pin
qa
(GND) pattern on
IF-108 board of CN2604 for 1 second.
10
11
CN2604
AC power adaptor
AC IN
Adjustment remote commander
(RM-95)
(RM-95)
Connection to Check the VTR Section
To check the VTR section, set the VTR to the "Forced VTR power ON" mode.
Operate the VTR functions using the adjustment remote commander (with the HOLD switch set in the OFF position).
Operate the VTR functions using the adjustment remote commander (with the HOLD switch set in the OFF position).
Setting the "Forced VTR Power ON" mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 02 and
2) Select page: D, address: 10, set data: 02 and
press the PAUSE button of the adjustment remote
commander.
commander.
Note: Although the following message is displayed when a power supply is switched on,
it is because the front panel is removed and this is normal.
Lens cover is not closed. Turn the power on again.
Exiting the "Forced VTR Power ON" mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, data: 00, and press the PAUSE
2) Select page: D, address: 10, data: 00, and press the PAUSE
button of the adjustment remote commander.
3) Select page: 0, address: 01, and set data: 00.
Procedure of removing mechanism deck (Mechanism deck service position)
1
2-1.
Top cabinet assembly ............................................. (PAGE 2-5)
2
2-2.
F panel block assembly .......................................... (PAGE 2-5)
3
2-5.
Cabinet R block assembly ...................................... (PAGE 2-7)
4
2-6.
FP-732/FP-734 flexible board ................................. (PAGE 2-7)
5
2-10. IF-108 board ......................................................... (PAGE 2-11)
6
2-11. SE-139 board, Mic unit ......................................... (PAGE 2-11)
7
2-12. Lens block assembly ............................................ (PAGE 2-12)
8
2-14. Cabinet G ............................................................. (PAGE 2-13)
9
2-15. Cabinet L assembly .............................................. (PAGE 2-13)
q;
2-16. VC-333 board ....................................................... (PAGE 2-14)
qa
2-17. Mechanism deck ................................................... (PAGE 2-14)
ACX510CMN-J (LCD901)
PD-199 board
AC power adaptor
AC IN
Adjustment remote commander (RM-95)
[SERVICE POSITION: LCD MODULE]
Click on the first or last page to see other DCR-IP1 / DCR-IP1E (serv.man2) service manuals if exist.