Read Sony DCR-HC94E / DCR-HC96 / DCR-HC96E (serv.man4) Service Manual online
6-21
DCR-HC94E/HC96/HC96E_ADJ
8.
1F Page table
Note 1: If reading/writing data on pages 1F, set data: 01 to page:
0, address: 10, and then select pages: F. By this data set-
ting, the pages 1F can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
ting, the pages 1F can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2: Fixed data-1: Initialized data. (“Refer to 1. Initializing
the E, F, 14, 19, 1E, 1F Page Data”)
Fixed data-2: Modified data. (“Refer to 2. Modification
of E, F, 14, 19, 1E, 1F Page Data”)
Fixed data-2: Modified data. (“Refer to 2. Modification
of E, F, 14, 19, 1E, 1F Page Data”)
Address
Initial value
Remark
NTSC PAL
00 to 0C
Fixed data-1 (Initialized data)
SI-054 Board (Suffix-11):
0D
Fixed data-1 (Initialized data)
SI-054 Board (Suffix-12):
0E
Fixed data-2
(Note 3)
0F to 6F
Fixed data-1 (Initialized data)
70
71
Fixed data-2
72 to 8D
Fixed data-1 (Initialized data)
8E
Fixed data-2
8F to 95
Fixed data-1 (Initialized data)
96
Fixed data-2
97 to AF
Fixed data-1 (Initialized data)
B0
B1
Fixed data-2
B2 to E5
Fixed data-1 (Initialized data)
E6
E7
Fixed data-2
E8 to FF
Fixed data-1 (Initialized data)
7.
1E Page table
Note 1: If reading/writing data on pages 1E, set data: 01 to page:
0, address: 10, and then select pages: E. By this data set-
ting, the pages 1E can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
ting, the pages 1E can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2: Fixed data-1: Initialized data. (Refer to “1. Initializing
the E, F, 14, 19, 1E, 1F Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of E, F, 14, 19, 1E, 1F Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of E, F, 14, 19, 1E, 1F Page Data”)
Address
Initial value
Remark
NTSC PAL
00 to 07
Fixed data-1 (Initialized data)
08
Fixed data-2
09 to 9F
Fixed data-1 (Initialized data)
A0
Fixed data-2
A1 to DA
Fixed data-1 (Initialized data)
DB
DC
Fixed data-2
DD to FF
Fixed data-1 (Initialized data)
Note 3: The data must be changed according to the suffix of the
SI-054 Board, and accordingly refer to the Service
Manual LEVEL 2, Supplement-2 (9-876-932-84).
Manual LEVEL 2, Supplement-2 (9-876-932-84).
Ver. 1.3 2007.09
Click on the first or last page to see other DCR-HC94E / DCR-HC96 / DCR-HC96E (serv.man4) service manuals if exist.