Read Sony DCR-HC17E / DCR-HC19E / DCR-HC21 / DCR-HC21E / DCR-HC22E / DCR-HC32 / DCR-HC32E / DCR-HC33 / DCR-HC33E (serv.man4) Service Manual online
6-76
DCR-HC17E/HC19E/HC21/HC21E/HC22E/HC32/HC32E/HC33/HC33E
7.
Jack Check (MS model)
7-1.
Jack Check (1) (Handycam station)
Page 7
Address FB
Note:
Check that the data of page: 0, address: 10 is “00”.
Using method:
1) Select page: 7, address: FB.
2) By discriminating the bit value of display data, the state of jack can be discriminated.
1) Select page: 7, address: FB.
2) By discriminating the bit value of display data, the state of jack can be discriminated.
7-2.
Jack Check (2)
Page 7
Address F3
Note:
Check that the data of page: 0, address: 10 is “00”.
Using method:
1) Select page: 7, address: F3.
2) By discriminating the bit value of display data, the state of jack can be discriminated.
1) Select page: 7, address: F3.
2) By discriminating the bit value of display data, the state of jack can be discriminated.
8.
Switch Check (Non MS model)
8-1.
Switch Check (1)
Page 2
Address 81
Note:
Check that the data of page: 0, address: 10 is “00”.
Using method:
1) Select page: 2, address: 81.
2) By discriminating the bit value of display data, the state of switch can be discriminated.
1) Select page: 2, address: 81.
2) By discriminating the bit value of display data, the state of switch can be discriminated.
8-2.
Switch Check (2)
Page 7
Address 08
Note:
Check that the data of page: 0, address: 10 is “00”.
Using method:
1) Select page: 7, address: 08.
2) By discriminating the bit value of display data, the state of switch can be discriminated.
1) Select page: 7, address: 08.
2) By discriminating the bit value of display data, the state of switch can be discriminated.
Bit
Function
When bit value = 1
When bit value = 0
0
CRADLE MULTI jack (CR-050 board CN002)
Used
Not used
Bit
Function
When bit value = 1
When bit value = 0
0
A/V jack (JK-278 board CN701)
Used
Not used
Bit
Function
When bit value = 1
When bit value = 0
0
Lens Cover (SI-042 board S601)
Close
Open
Bit
Function
When bit value = 1
When bit value = 0
0
POWER (SS10300 block)
ON
OFF
1
MODE CHANGE (SS10300 block)
ON
OFF
2
DISP/BATT INFO (FP-187 fleible S001)
ON
OFF
3
EJECT (SS10300 block S001)
ON
OFF
4
CC DOWN (Mechanism chassis)
ON (DOWN)
OFF (UP)
Click on the first or last page to see other DCR-HC17E / DCR-HC19E / DCR-HC21 / DCR-HC21E / DCR-HC22E / DCR-HC32 / DCR-HC32E / DCR-HC33 / DCR-HC33E (serv.man4) service manuals if exist.