Read Sony DCR-DVD406E / DCR-DVD408 / DCR-DVD408E / DCR-DVD506E / DCR-DVD508 / DCR-DVD508E / DCR-DVD808 / DCR-DVD808E / DCR-DVD908 / DCR-DVD908E (serv.man5) Service Manual online
6-40
DCR-DVD406E/DVD408/DVD408E/DVD506E/DVD508/DVD508E/DVD808/DVD808E/DVD908/DVD908E_ADJ
1.
Diagnosis section
Use these buttons when diagnosing the drive block.
2.
Adjustment section
Use these buttons when adjusting the drive block.
3.
Comment display section
At the execution of diagnosis and adjustment, its progress situa-
tion is displayed.
1) [Clear] button
tion is displayed.
1) [Clear] button
This button clears the comment in the display section.
2) [LOG] button
This button saves the comment in the display section as a log
file.
file.
Fig. 6-2-7
4.
Status display section
The result of diagnosis and adjustment is displayed.
Fig. 6-2-8
5.
[STOP]
button
This button stops the diagnosis and adjustment in the midway.
6.
[SET]
button (After completing the TEST)
This button cancels the TEST mode set to the cam coder during
the diagnosis and adjustment. If the TEST mode is cancelled suc-
cessfully, the following message is displayed.
the diagnosis and adjustment. If the TEST mode is cancelled suc-
cessfully, the following message is displayed.
Note:
Before exiting the AUDIT, be sure to cancel the TEST mode
by clicking the SET button of “After completing the TEST”.
Unless the TEST mode is cancelled, the drive may not op-
erate normally, such that “disc cover does not open”, “drive
error is displayed”, etc..
by clicking the SET button of “After completing the TEST”.
Unless the TEST mode is cancelled, the drive may not op-
erate normally, such that “disc cover does not open”, “drive
error is displayed”, etc..
Fig. 6-2-9
7.
Menu section
1) [RESET] button
This button resets internal register.
(Use this button to interrupt the work so far when diagnosis
and adjustment stopped and no response is returned. The work
terminates with the previous adjustment data written to the
camcoder.)
(Use this button to interrupt the work so far when diagnosis
and adjustment stopped and no response is returned. The work
terminates with the previous adjustment data written to the
camcoder.)
2) [Lid Open] button
This button opens the disc cover.
8.
Caution display section
At the execution of POWER Adjustment, the caution of POWER
Adjustment is displayed.
Adjustment is displayed.
Fig. 6-2-10
[Clear]
button
[LOG]
button
Click on the first or last page to see other DCR-DVD406E / DCR-DVD408 / DCR-DVD408E / DCR-DVD506E / DCR-DVD508 / DCR-DVD508E / DCR-DVD808 / DCR-DVD808E / DCR-DVD908 / DCR-DVD908E (serv.man5) service manuals if exist.