Read Sony DCR-DVD406E / DCR-DVD408 / DCR-DVD408E / DCR-DVD506E / DCR-DVD508 / DCR-DVD508E / DCR-DVD808 / DCR-DVD808E / DCR-DVD908 / DCR-DVD908E (serv.man3) Service Manual online
1-4
DCR-DVD406E/DVD408/DVD408E/DVD506E/DVD508/
DVD508E/DVD808/DVD808E/DVD908/DVD908E_L2
DVD508E/DVD808/DVD808E/DVD908/DVD908E_L2
ENGLISH
JAPANESE
ENGLISH
JAPANESE
1-7. METHOD OF COPING WITH SHIFT LENS ERROR
(DVD506E/DVD508/DVD508E/DVD908/DVD908E)
R5792
IC5703
R5721
R5737
LD-216 BOARD (SIDE A)
about 330 msec
Fig. 3
Measurement points on the VC-478 board
Fig. 2
Change in output voltage of R5792 on the LD-216 board
Note: The length of low section will vary a little depending on the
conditions.
Fig. 1
Measurement points on the LD-216 board
VC-478 BOARD
(SIDE A)
VC-478 BOARD
(SIDE B)
R1846
IC1803
1-6. PROCESS AFTER FIXING FLASH ERROR
When “FLASH error” (Self-diagnosis Code E:91:01) occurs, to prevent any abnormal situation caused by high voltage, setting of the
flash is changed automatically to disabling charge and flash setting.
After fixing, this setting needs to be deactivated. For the method of the error releasa, refer to “6.Record Data, Initializing method (All
Record-Data)” in service manual, ADJ.
flash is changed automatically to disabling charge and flash setting.
After fixing, this setting needs to be deactivated. For the method of the error releasa, refer to “6.Record Data, Initializing method (All
Record-Data)” in service manual, ADJ.
Note: The error cannot be released only by initializing oniy the self-diagnosis data, be sure to excute the initiazation of all
record-data to release the error.
Click on the first or last page to see other DCR-DVD406E / DCR-DVD408 / DCR-DVD408E / DCR-DVD506E / DCR-DVD508 / DCR-DVD508E / DCR-DVD808 / DCR-DVD808E / DCR-DVD908 / DCR-DVD908E (serv.man3) service manuals if exist.