Read Sony DCR-DVD405 (serv.man3) Service Manual online
6-65
DCR-DVD404E/DVD405/DVD405E/DVD805/DVD805E_ADJ
START button
Status lamp
Adjustment buttons
Fig. 6-2-15
2-7-2.
Adjusting Method
Order
1
2
3
4
5
Diagnostic item
Wobble BPF
Center
Jiter & BLER
Data Dump
Operation
Click the
[START]
button of “DVD+RW Ad-
justment”.
Set the DVD+RW Reference Disc, and then
close the disc cover and click the
close the disc cover and click the
[OK]
but-
ton in the message window.
(If the adjustment result of previous item is
OK, this item is executed successively.)
OK, this item is executed successively.)
(If the adjustment result of previous item is
OK, this item is executed successively.)
OK, this item is executed successively.)
Remove the DVD+RW Reference Disc.
(On the AUDIT screen, if the status lamps of
respective adjustment buttons are all lit in
green, the adjustment is over.)
(On the AUDIT screen, if the status lamps of
respective adjustment buttons are all lit in
green, the adjustment is over.)
Message
Disc
No Disc
DVD+RW
Reference Disc
Reference Disc
No Disc
2-7.
DVD+RW ADJUSTMENT
2-7-1.
Menu in DVD+RW Adjustment Section
START button:
All items of adjustment buttons are ex-
ecuted in the descending order.
ecuted in the descending order.
Adjustment button:
Only the adjustment item assigned to the
button name is executed.
button name is executed.
Status lamp:
Adjustment status is displayed with color.
White ················ Not adjusted
Red blinking ···· Adjustment in progress
Green ················ Adjustment OK
Red ··················· Adjustment NG
White ················ Not adjusted
Red blinking ···· Adjustment in progress
Green ················ Adjustment OK
Red ··················· Adjustment NG
Note:
Before exiting the AUDIT, click the
[SET]
button of “After completing the TEST” to cancel the TEST mode.
Click on the first or last page to see other DCR-DVD405 (serv.man3) service manuals if exist.