Read Sony DCR-DVD405 (serv.man3) Service Manual online
6-64
DCR-DVD404E/DVD405/DVD405E/DVD805/DVD805E_ADJ
Fig. 6-2-14
START button
Status lamp
Adjustment buttons
Order
1
2
3
4
5
6
7
8
9
10
Diagnostic item
OP Sensitivity
Offset Adjust
FE Balance
Write FE Bal
Servo Adjust
Disc Distinction
Threshold
Write Offset
Jitter & BLER
Operation
Click the
[START]
button of “DVD-RW Ad-
justment”.
Set the DVD-RW Reference + DOW Disc,
and then close the disc cover and click the
and then close the disc cover and click the
[OK]
button in the message window.
(If the adjustment result of previous item is
OK, this item is executed successively.)
OK, this item is executed successively.)
(If the adjustment result of previous item is
OK, this item is executed successively.)
OK, this item is executed successively.)
(If the adjustment result of previous item is
OK, this item is executed successively.)
OK, this item is executed successively.)
(If the adjustment result of previous item is
OK, this item is executed successively.)
OK, this item is executed successively.)
(If the adjustment result of previous item is
OK, this item is executed successively.)
OK, this item is executed successively.)
(If the adjustment result of previous item is
OK, this item is executed successively.)
OK, this item is executed successively.)
(If the adjustment result of previous item is
OK, this item is executed successively.)
OK, this item is executed successively.)
Remove the DVD-RW Reference + DOW
Disc. (On the AUDIT screen, if the status
lamps of respective adjustment buttons are
all lit in green, the adjustment is over.)
Disc. (On the AUDIT screen, if the status
lamps of respective adjustment buttons are
all lit in green, the adjustment is over.)
Message
Disc
No Disc
DVD-RW
Reference + DOW
Disc
Reference + DOW
Disc
No Disc
2-6.
DVD-RW ADJUSTMENT
2-6-1.
Menu in DVD-RW Adjustment Section
START button:
All items of adjustment buttons are ex-
ecuted in the descending order.
ecuted in the descending order.
Adjustment button:
Only the adjustment item assigned to the
button name is executed.
button name is executed.
Status lamp:
Adjustment status is displayed with color.
White ················ Not adjusted
Red blinking ···· Adjustment in progress
Green ················ Adjustment OK
Red ··················· Adjustment NG
White ················ Not adjusted
Red blinking ···· Adjustment in progress
Green ················ Adjustment OK
Red ··················· Adjustment NG
2-6-2.
Adjusting Method
Note:
Before exiting the AUDIT, click the
[SET]
button of “After completing the TEST” to cancel the TEST mode.
Click on the first or last page to see other DCR-DVD405 (serv.man3) service manuals if exist.