Read Sony DCR-DVD201 / DCR-DVD201E (serv.man4) Service Manual online
6-8
DCR-DVD201/DVD201E
1-2.
INITIALIZATION OF A, B, C, D, E, F, 14, 19,
1B, 1E, 1F PAGE DATA
1B, 1E, 1F PAGE DATA
Note:
When reading or writing the 14, 19, 1B, 1E, 1F page data, select
page: 0, address: 10, and set data: 01, then select 4, 9, B, E or F
page. The 14, 19, 1B, 1E or 1F page can be chosen by this data
setting.
After reading or writing, reset the data of page: 0, address: 10 to
“00”.
page: 0, address: 10, and set data: 01, then select 4, 9, B, E or F
page. The 14, 19, 1B, 1E or 1F page can be chosen by this data
setting.
After reading or writing, reset the data of page: 0, address: 10 to
“00”.
1-2-1.
INITIALIZATION OF A, B, C, D, 1B PAGE DATA
Note:
When reading or writing the A, B, C, D page data, select page: 0,
address: 10, and set data: 00.
When reading or writing the 1B page data, select page: 0, address:
10, and set data: 01, then select B page. The 1B page can be chosen
by this data setting.
After reading or writing, reset the data of page: 0, address: 10 to
“00”.
address: 10, and set data: 00.
When reading or writing the 1B page data, select page: 0, address:
10, and set data: 01, then select B page. The 1B page can be chosen
by this data setting.
After reading or writing, reset the data of page: 0, address: 10 to
“00”.
1. Initializing the A, B, C, D, 1B Page Data
Note1:
Reading/writing the C page data by using the
is
impossible.
Note2:
If the B page data has been initialized, the following adjustments
need to be performed again.
1) Viewfinder system adjustments
2) LCD system adjustments
3) Video system adjustments
need to be performed again.
1) Viewfinder system adjustments
2) LCD system adjustments
3) Video system adjustments
Note3:
NTSC model : DCR-DVD201
PAL model
PAL model
: DCR-DVD201E
Adjusting page
A
Adjusting Address
10 to FF
Adjusting page
B
Adjusting Address
30 to FF
Adjusting page
C
Adjusting Address
10 to FF
Adjusting page
D
Adjusting Address
10 to 76
Adjusting page
1B
Adjusting Address
10 to FF
Initializing Method:
Order Page Address Data
Procedure
1
0
01
01
Set the data.
2
0
10
00
Set the data.
3
7
02
00
Set the data.
4
7
03
Set the following data.
01(NTSC), 81(PAL)
01(NTSC), 81(PAL)
5
7
00
XX
Set the data. (Note4)
6
7
01
XX
Set the data, and press PAUSE
button. (Note4)
button. (Note4)
7
7
02
Check that the data changes to
“01”
“01”
Perform “Modification of A, B, C,
D, 1B Page Data”.
D, 1B Page Data”.
Note4:
XX=20: Initializing A page
XX=21: Initializing B page
XX=22: Initializing 1B page
XX=23: Initializing D page
XX=24: Initializing C page
XX=28: Initializing A, B, C, D and 1B page
XX=21: Initializing B page
XX=22: Initializing 1B page
XX=23: Initializing D page
XX=24: Initializing C page
XX=28: Initializing A, B, C, D and 1B page
2. Modification of A, B, C, D, 1B Page Data
If the A, B, C, D or 1B page data has been initialized, change the
data of the “Fixed data-2” address of the initialized page shown in
the following tables by manual input.
data of the “Fixed data-2” address of the initialized page shown in
the following tables by manual input.
Modifying Method:
1)
1)
Before changing the data, select page: 0, address: 01, and set
data: 01.
data: 01.
2)
When changing the A, B, C, D page data, select page: 0, address:
10, and set data: 00.
10, and set data: 00.
3)
When changing the 1B page data, select page: 0, address: 10,
and set data: 01.
After completing the modification of 1B page data, reset the
data of this address to “00”.
and set data: 01.
After completing the modification of 1B page data, reset the
data of this address to “00”.
4)
New data for changing are not shown in the tables because
they are different in destination. When changing the data, copy
the data built in the same model.
they are different in destination. When changing the data, copy
the data built in the same model.
Note:
If copy the data built in the different model, the camcorder may
not operate.
not operate.
5) When changing the data, press the PAUSE button of the
adjustment remote commander each time when setting new
data to write the data in the non-volatile memory.
data to write the data in the non-volatile memory.
Processing after Completing Modification of A, B, C, D, 1B Page data
Order Page Address Data
Procedure
1
0
01
00
Set the data.
2
Turn off the power and turn on
again.
again.
Note:
If the following symptoms occur after completing of the
“Modification of A, B, C, D, 1B page data”, check that the data of
addresses: 1A to 4F of A page and the data of addresses: 12 to 19 of
D page are same as those of the same model of the same destination.
1) The self-diagnosis code “E:20:00” on the LCD screen is displayed.
2) The power is shut off so that unit cannot operate.
“Modification of A, B, C, D, 1B page data”, check that the data of
addresses: 1A to 4F of A page and the data of addresses: 12 to 19 of
D page are same as those of the same model of the same destination.
1) The self-diagnosis code “E:20:00” on the LCD screen is displayed.
2) The power is shut off so that unit cannot operate.
Click on the first or last page to see other DCR-DVD201 / DCR-DVD201E (serv.man4) service manuals if exist.