Read Sony DCR-DVD201 / DCR-DVD201E (serv.man4) Service Manual online
6-5
DCR-DVD201/DVD201E
Fig. 6-1-2.
1-1-2.
Preparations
Note1:
For details of how remove the cabinet and boards, refer to “2.
DISASSEMBLY”.
DISASSEMBLY”.
Note2:
When performing only the adjustments, the lens block and boards
need not be disassembled.
need not be disassembled.
Note3:
Before performing the adjustments, check the data of page: 0,
address: 10 is “00”. If not, set data: 00 to this address.
address: 10 is “00”. If not, set data: 00 to this address.
1)
Connect the equipment for adjustments according to Fig. 6-1-3.
Note4:
As removing the cabinet (R) assembly (removing CN1004 of the
VC-354 board) means removing the lithium 3V power supply
(BT5201 on the FP-884 flexible board), data such as date, time,
user-set menus will be lost. After completing adjustments, reset
these data.
But the self-diagnosis data and the data on history of use (user
initial power on date, final condensation occurrence data) will be
kept even if the lithium 3V power supply is removed. (Refer to
“6-3. Service Mode” for the self-diagnosis data and the data on
history of use.)
VC-354 board) means removing the lithium 3V power supply
(BT5201 on the FP-884 flexible board), data such as date, time,
user-set menus will be lost. After completing adjustments, reset
these data.
But the self-diagnosis data and the data on history of use (user
initial power on date, final condensation occurrence data) will be
kept even if the lithium 3V power supply is removed. (Refer to
“6-3. Service Mode” for the self-diagnosis data and the data on
history of use.)
Note5:
Setting the “Forced MOVIE mode”.
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 01, and press the PAUSE
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 01, and press the PAUSE
button.
The above procedure will enable the camera power to be turned
on with the control switch block (PS8700) removed. After
completing adjustments, be sure to exit the “Forced MOVIE mode”.
on with the control switch block (PS8700) removed. After
completing adjustments, be sure to exit the “Forced MOVIE mode”.
Note6:
Exiting the “Forced MOVIE mode”.
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 00, and press the PAUSE
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 00, and press the PAUSE
button.
3) Select page: 0, address: 01, and set data: 00.
Front of the lens
Pattern box
1.0 m
Click on the first or last page to see other DCR-DVD201 / DCR-DVD201E (serv.man4) service manuals if exist.