Read Sony DCR-DVD110E / DCR-DVD115E / DCR-DVD310E / DCR-DVD410E / DCR-DVD610 / DCR-DVD610E / DCR-DVD710 / DCR-DVD710E / DCR-DVD810 / DCR-DVD810E (serv.man2) Service Manual online
1-3
ENGLISH
JAPANESE
ENGLISH
JAPANESE
DCR-DVD110E/DVD115E/DVD310E/DVD410E/DVD610/
DVD610E/DVD710/DVD710E/DVD810/DVD810E_L2
DVD610E/DVD710/DVD710E/DVD810/DVD810E_L2
1-5-3. Self-diagnosis Code Table
C
C
C
E
E
E
E
E
E
E
E
E
Block
Function
0
4
1
3
1
3
2
0
3
1
6
1
6
1
6
1
6
2
6
2
9
4
9
4
Detailed
Code
0
0
0
1
0
2
0
0
0
0
0
0
1
0
1
1
0
0
0
1
0
0
0
1
Symptom/State
Non-standard battery is used.
“Memory Stick Duo” is unformatted.
“Memory Stick Duo” is broken.
“Memory Stick Duo” is broken.
Disc access error
Flash memory data are rewritten.
Drive fault
Difficult to adjust focus
(Cannot initialize focus.)
(Cannot initialize focus.)
Zoom operations fault
(Cannot initialize zoom lens.)
(Cannot initialize zoom lens.)
The abnormalities in initialization of
the focus lens and the abnormalities in
initialization of the zoom lens occurred
simultaneously.
the focus lens and the abnormalities in
initialization of the zoom lens occurred
simultaneously.
Handshake correction function does not
work well. (With PITCH angular
velocity sensor output stopped.)
work well. (With PITCH angular
velocity sensor output stopped.)
Handshake correction function does not
work well. (With YAW angular velocity
sensor output stopped.)
work well. (With YAW angular velocity
sensor output stopped.)
Fault of writing to or erasing the flash
memory
memory
Internal flash memory fault
Self-diagnosis Code
Repaired b
y:
Correction
Use the InfoLITHIUM battery.
Format the “Memory Stick Duo”.
Insert a new “Memory Stick Duo”.
Insert a new “Memory Stick Duo”.
Clean the disc with the supplied cleaning cloth.
Use a compatible disc with the camcorder.
Use a compatible disc with the camcorder.
Make flash memory data correct value. (Note 1)
Inspect or replacement of the mechanism deck, IC (IC4401 on
the VC-520 board) and drive block.
the VC-520 board) and drive block.
Inspect the lens block focus reset sensor (pin 7 of CN5101 on
the VC-520 board) when focusing is performed when the focus
buttons of the touch panel are pressed in the focus manual mode,
and the focus motor drive circuit (IC5401 (Non MEGA model)
or IC5301 (MEGA model) on the VC-520 board) when the
focusing is not performed.
the VC-520 board) when focusing is performed when the focus
buttons of the touch panel are pressed in the focus manual mode,
and the focus motor drive circuit (IC5401 (Non MEGA model)
or IC5301 (MEGA model) on the VC-520 board) when the
focusing is not performed.
Inspect the lens block zoom reset sensor (pin qa of CN5101 on
the VC-520 board) when zooming is performed when the zoom
lever is operated, and the zoom motor drive circuit (IC5401 (Non
MEGA model) or IC5301 (MEGA model) on the VC-520 board)
when zooming is not performed.
the VC-520 board) when zooming is performed when the zoom
lever is operated, and the zoom motor drive circuit (IC5401 (Non
MEGA model) or IC5301 (MEGA model) on the VC-520 board)
when zooming is not performed.
Check whether the flexible board of the lens is broken, and
check whether it is inserted imperfectly. If there is no problem in
the flexible board, inspect the focus/zoom motor drive circuit
(IC5401 (Non MEGA model) or IC5301 (MEGA model) on the
VC-520 board).
check whether it is inserted imperfectly. If there is no problem in
the flexible board, inspect the focus/zoom motor drive circuit
(IC5401 (Non MEGA model) or IC5301 (MEGA model) on the
VC-520 board).
Inspect PITCH angular velocity sensors (SE7002 on the CD-
672/CD-687 board) peripheral circuits. (MEGA model only)
672/CD-687 board) peripheral circuits. (MEGA model only)
Inspect YAW angular velocity sensors (SE7001 on the CD-672/
CD-687 board) peripheral circuits. (MEGA model only)
CD-687 board) peripheral circuits. (MEGA model only)
Inspect the flash memory (IC2101 on the VC-520 board). (Note 1)
Inspect the internal flash memory (MDL4060S3C) (DVD410E/
DVD810/DVD810E only)
DVD810/DVD810E only)
Note 1:
Refer to “1-3. DESTINATION DATA WRITE”, ADJ (9-852-249-51).
Note 2:
Non MEGA model: DCR-DVD110E/DVD115E/DVD610/DVD610E
MEGA model: DCR-DVD310E/DVD410E/DVD710/DVD710E/DVD810/DVD810E
MEGA model: DCR-DVD310E/DVD410E/DVD710/DVD710E/DVD810/DVD810E
Click on the first or last page to see other DCR-DVD110E / DCR-DVD115E / DCR-DVD310E / DCR-DVD410E / DCR-DVD610 / DCR-DVD610E / DCR-DVD710 / DCR-DVD710E / DCR-DVD810 / DCR-DVD810E (serv.man2) service manuals if exist.