Read Sony DCR-DVD106E / DCR-DVD108 / DCR-DVD108E / DCR-DVD109E / DCR-DVD608 / DCR-DVD608E (serv.man2) Service Manual online
1-3E
DCR-DVD106E/DVD108/DVD108E/DVD109E/DVD608/DVD608E_L2
1-4-3. Self-diagnosis Code Table
C
C
C
E
E
E
E
E
E
Block
Function
0
4
1
3
1
3
2
0
3
1
6
1
6
1
6
1
9
4
Detailed
Code
0
0
0
1
0
2
0
0
0
0
0
0
1
0
1
1
0
0
Symptom/State
Non-standard battery is used.
“Memory Stick Duo” is unformatted.
“Memory Stick Duo” is broken.
“Memory Stick Duo” is broken.
Disc access error
Flash memory data are rewritten.
Drive fault
Difficult to adjust focus
(Cannot initialize focus.)
(Cannot initialize focus.)
Zoom operations fault
(Cannot initialize zoom lens.)
(Cannot initialize zoom lens.)
The abnormalities in initialization of
the focus lens and the abnormalities in
initialization of the zoom lens occurred
simultaneously.
the focus lens and the abnormalities in
initialization of the zoom lens occurred
simultaneously.
Fault of writing to or erasing the flash
memory
memory
Self-diagnosis Code
Repaired b
y:
Correction
Use the InfoLITHIUM battery.
Format the “Memory Stick Duo”.
Insert a new “Memory Stick Duo”.
Insert a new “Memory Stick Duo”.
Clean the disc with the supplied cleaning cloth.
Use a compatible disc with the camcorder.
Use a compatible disc with the camcorder.
Make flash memory data correct value. (Note)
Inspect or replacement of the mechanism deck, IC (IC4401 on
the VC-483 board) and drive block.
the VC-483 board) and drive block.
Inspect the lens block focus reset sensor (pin 7 of CN5601 on
the VC-483 board) when focusing is performed when the focus
buttons of the touch panel are pressed in the focus manual mode,
and the focus motor drive circuit (IC5601 on the VC-483 board)
when the focusing is not performed.
the VC-483 board) when focusing is performed when the focus
buttons of the touch panel are pressed in the focus manual mode,
and the focus motor drive circuit (IC5601 on the VC-483 board)
when the focusing is not performed.
Inspect the lens block zoom reset sensor (pin qa of CN5601 on
the VC-483 board) when zooming is performed when the zoom
lever is operated, and the zoom motor drive circuit (IC5601 on
the VC-483 board) when zooming is not performed.
the VC-483 board) when zooming is performed when the zoom
lever is operated, and the zoom motor drive circuit (IC5601 on
the VC-483 board) when zooming is not performed.
Check whether the flexible board of the lens is broken, and
check whether it is inserted imperfectly. If there is no problem in
the flexible board, inspect the focus/zoom motor drive circuit
(IC5601 on the VC-483 board).
check whether it is inserted imperfectly. If there is no problem in
the flexible board, inspect the focus/zoom motor drive circuit
(IC5601 on the VC-483 board).
Inspect the flash memory (IC2201 on the VC-483 board). (Note)
Note:
Refer to “1-3. DESTINATION DATA WRITE”, ADJ (9-852-173-51).
Click on the first or last page to see other DCR-DVD106E / DCR-DVD108 / DCR-DVD108E / DCR-DVD109E / DCR-DVD608 / DCR-DVD608E (serv.man2) service manuals if exist.