Read Sony DCR-DVD106E / DCR-DVD108 / DCR-DVD108E / DCR-DVD109E / DCR-DVD608 / DCR-DVD608E (serv.man2) Service Manual online
Revision History
Revision History
Sony EMCS Co.
DCR-DVD106E/DVD108/DVD108E/DVD109E/DVD608/DVD608E_L2
SERVICE MANUAL
LEVEL
2
Link
SERVICE NOTE
MODEL INFORMATION TABLE
SPECIFICATIONS
FRAME SCHEMATIC DIAGRAM
BLOCK DIAGRAMS
DISASSEMBLY
PRINTED WIRING BOARDS
REPAIR PARTS LIST
SCHEMATIC DIAGRAMS
Link
How to use
Acrobat Reader
How to use
Acrobat Reader
Ver. 1.5 2010.03
2010C0500-1
© 2010.3
Published by Tokai TEC
9-852-173-32
US Model
Canadian Model
AEP Model
UK Model
East European Model
North European Model
E Model
Australian Model
Hong Kong Model
Chinese Model
Argentine Model
Brazilian Model
The components identified by
mark 0 or dotted line with
mark 0 are critical for safety.
Replace only with part num-
ber specified.
mark 0 or dotted line with
mark 0 are critical for safety.
Replace only with part num-
ber specified.
Les composants identifiés par une
marque 0 sont critiques pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
marque 0 sont critiques pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
Photo: DCR-DVD108
DIGITAL VIDEO CAMERA RECORDER
DCR-DVD106E/DVD108/DVD108E/
DVD109E/DVD608/DVD608E
— 2 —
DCR-DVD106E/DVD108/DVD108E/DVD109E/DVD608/DVD608E_L2
SPECIFICATIONS
System
Video compression format
MPEG2/JPEG (Still images)
Audio compression format
DCR-DVD106E/DVD108E/DVD608E
Dolby Digital 2ch
Dolby Digital Stereo Creator
Dolby Digital Stereo Creator
DCR-DVD109E
Dolby Digital 2/5.1ch
Dolby Digital 5.1 Creator
Dolby Digital 5.1 Creator
Video signal
PAL color, CCIR standards
Usable discs
8 cm DVD-RW/DVD+RW/DVD-R/
DVD+R DL
DVD+R DL
Recording format
Movie
DVD-RW: DVD-VIDEO (VIDEO mode),
DVD-Video Recording
(VR mode)
(VR mode)
DVD+RW: DVD+RW Video
DVD-R/DVD+R DL: DVD-VIDEO
DVD-R/DVD+R DL: DVD-VIDEO
Still image
Exif
*
Ver.2.2
Recording time
DVD-RW/DVD+RW/DVD-R
HQ: Approx. 20 min
SP: Approx. 30 min
LP: Approx. 60 min
DVD+R DL
HQ: Approx. 35 min
SP: Approx. 55 min
LP: Approx. 110 min
HQ: Approx. 20 min
SP: Approx. 30 min
LP: Approx. 60 min
DVD+R DL
HQ: Approx. 35 min
SP: Approx. 55 min
LP: Approx. 110 min
Viewfinder
Electric viewfinder (color)
Image device
3 mm (1/6 type) CCD (Charge Coupled Device)
Gross:
Approx. 800 000 pixels
Effective (Movie):
Approx. 400 000 pixels
Effective (Still):
Approx. 400 000 pixels
Gross:
Approx. 800 000 pixels
Effective (Movie):
Approx. 400 000 pixels
Effective (Still):
Approx. 400 000 pixels
Lens
Carl Zeiss Vario-Tessar
Optical:40
Optical:40
×, Digital:80×, 2 000×
Focal length
F=1.8-4.1
f=1.9 - 76.0mm (3/32 - 3 in.)
When converted to a 35 mm still camera
For movies:
36 - 1 440mm (1 7/16 - 56 3/4 in.)
For still images:
36 - 1 440mm (1 7/16 - 56 3/4 in.)
f=1.9 - 76.0mm (3/32 - 3 in.)
When converted to a 35 mm still camera
For movies:
36 - 1 440mm (1 7/16 - 56 3/4 in.)
For still images:
36 - 1 440mm (1 7/16 - 56 3/4 in.)
Color temperature
[AUTO], [ONE PUSH], [INDOOR] (3 200 K),
[OUTDOOR] (5 800 K)
[OUTDOOR] (5 800 K)
Minimum illumination
3 lx (lux) (AUTO SLW SHUTTR ON, Shutter
speed 1/25 second)
0 lx (lux) (during NightShot plus function)
speed 1/25 second)
0 lx (lux) (during NightShot plus function)
* “Exif” is a file format for still images, established
by the JEITA (Japan Electronics and Information
Technology Industries Association). Files in this
format can have additional information such as
your camcorder’s setting information at the time
of recording.
Technology Industries Association). Files in this
format can have additional information such as
your camcorder’s setting information at the time
of recording.
**In 16:9 mode, the focal length figures are actual
figures resulting from wide angle pixel readout.
• Manufactured under license from Dolby
Laboratories.
Input/Output connectors
Audio/Video output
10 pin connector
Video signal: 1 Vp-p, 75
Video signal: 1 Vp-p, 75
Ω (ohms)
Luminance signal: 1 Vp-p, 75
Ω (ohms)
Chrominance signal: 0.3 Vp-p, 75
Ω (ohms)
Audio signal: 327 mV (at Load impedance
47 k
47 k
Ω (kilohms)), Output impedance less than
2.2 k
Ω (kilohms)
USB jack
mini-B
(DCR-DVD106E/DVD109E: output only)
(DCR-DVD106E/DVD109E: output only)
LCD screen
Picture
6.2 cm (2.5 type)
Total number of pixels
123 200 (560
× 220)
General
Power requirements
6.8 V/7.2 V (battery pack)
8.4 V (AC Adaptor)
8.4 V (AC Adaptor)
Average power consumption
DCR-DVD106E/DVD108E/DVD608E
LCD : 2.9W
Viewfinder : 2.7W
Viewfinder : 2.7W
DCR-DVD109E
LCD : 3.0W
Viewfinder : 2.8W
Viewfinder : 2.8W
Operating temperature
0
°C to +40°C (32°F to 104°F)
Storage temperature
-20
°C to +60°C (-4°F to +140°F)
Dimensions (Approx.)
54.5
× 89 × 130.5 mm (2 1/4 × 3 5/8 × 5 1/4
in.) (w
× h × d) including the projecting parts
54.5
× 89 × 130.5 mm (2 1/4 × 3 5/8 × 5 1/4
in.) (w
× h × d) including the projecting parts
with supplied battery pack NP-FH40 attached
Mass (Approx.)
390 g (13 oz) main unit only
440 g (15 oz) including the NP-FH40
rechargeable battery pack and disc
440 g (15 oz) including the NP-FH40
rechargeable battery pack and disc
Supplied accessories
See page 5-18.
AC Adaptor AC-L200/L200B
Power requirements
AC 100 - 240 V, 50/60 Hz
Current consumption
0.35 - 0.18 A
Power consumption
18W
Output voltage
DC 8.4V
*
Operating temperature
0
°C to +40°C (32°F to 104°F)
Storage temperature
-20
°C to +60°C (-4°F to +140°F)
Dimensions (Approx.)
48
× 29 × 81 (1 15/16 × 1 3/16 × 3 1/4 in.)
(w
× h × d) excluding the projecting parts
Mass (Approx.)
170 g (6 oz) excluding the mains lead
*
See at the label of AC Adaptor for other
specifications.
specifications.
Rechargeable battery pack NP-FH40
Maximum output voltage
DC8.4V
Output voltage
DC7.2V
Capacity
4.9 wh (680 mAh)
Dimensions (Approx.)
31.8
× 18.5 × 45.0 mm
(1 5/16
× 3/4 × 1 13/16 in.) (w × h × d)
Mass (Approx.)
45 g (1.6 oz)
Operating temperature
0
°C to +40°C (32°F to 104°F)
Type
Li-ion
Design and specifications are subject to change
without notice.
without notice.
AC Adaptor (1)
Mains lead (1)
A/V connecting cable (1)
USB cable (1)
Rechargeable battery pack NP-FH40 (1)
CD-ROM “Handycam Application Software” (1)
Operating Guide (1)
Mains lead (1)
A/V connecting cable (1)
USB cable (1)
Rechargeable battery pack NP-FH40 (1)
CD-ROM “Handycam Application Software” (1)
Operating Guide (1)
— 3 —
DCR-DVD106E/DVD108/DVD108E/DVD109E/DVD608/DVD608E_L2
Model information table
• Abbreviation
AR
: Argentine model
AUS : Australian model
BR
BR
: Brazilian model
CH
: Chinese model
CND : Canadian model
EE
EE
: East European model
HK : Hong Kong model
J
J
: Japanese model
JE
: Tourist model
KR
: Korea model
MX : Mexican model
NE
NE
: North European model
Model
DCR-DVD106E
DCR-DVD108
DCR-DVD108E
Destination
AEP, UK, EE, NE
US, CND, E, AR, BR
NE
Color system
PAL
NTSC
PAL
5.1ch recording
×
×
×
Data CAM → PC
a
a
a
copy PC → CAM
×
a
a
Model
DCR-DVD109E
DCR-DVD608
DCR-DVD608E
Destination
AEP, UK, EE, NE
E
E, HK, AUS, CH
Color system
PAL
NTSC
PAL
5.1ch recording
a
×
×
Data CAM → PC
a
a
a
copy PC → CAM
×
a
a
— 4 —
DCR-DVD106E/DVD108/DVD108E/DVD109E/DVD608/DVD608E_L2
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK
0
OR DOTTED LINE WITH
MARK
0
ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
1.
Check the area of your repair for unsoldered or poorly-soldered
connections. Check the entire board surface for solder splashes
and bridges.
connections. Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
4.
Look for parts which, through functioning, show obvious signs
of deterioration. Point them out to the customer and
recommend their replacement.
of deterioration. Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270˚C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE
0
SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
Unleaded solder
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40
• Unleaded solder melts at a temperature about 40
°C higher than
ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350
°C.
Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!
heated tip is applied for too long, so be careful!
• Strong viscosity
Unleaded solder is more viscous (sticky, less prone to flow) than
ordinary solder so use caution not to let solder bridges occur such
as on IC pins, etc.
ordinary solder so use caution not to let solder bridges occur such
as on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
also be added to ordinary solder.
WARNING!!
WHEN SERVICING, DO NOT APPROACH THE LASER
EXIT WITH THE EYE TOO CLOSELY. IN CASE IT IS
NECESSARY TO CONFIRM LASER BEAM EMISSION,
BE SURE TO OBSERVE FROM A DISTANCE OF MORE
THAN 30 cm FROM THE SURFACE OF THE
OBJECTIVE LENS ON THE OPTICAL PICK-UP BLOCK.
EXIT WITH THE EYE TOO CLOSELY. IN CASE IT IS
NECESSARY TO CONFIRM LASER BEAM EMISSION,
BE SURE TO OBSERVE FROM A DISTANCE OF MORE
THAN 30 cm FROM THE SURFACE OF THE
OBJECTIVE LENS ON THE OPTICAL PICK-UP BLOCK.
CAUTION :
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
CAUTION
Use of controls or adjustments or perfor mance
procedures other than those specified herein may
result in hazardous radiation exposure.
Use of controls or adjustments or perfor mance
procedures other than those specified herein may
result in hazardous radiation exposure.
CAUTION:
The use of optical instrument with this product will increase eye
hazard.
hazard.
