Read Sony CCD-TRV54E / CCD-TRV56E / CCD-TRV62 / CCD-TRV64E / CCD-TRV72 / CCD-TRV82 / CCD-TRV94 / CCD-TRV94E Service Manual online
5-7
Hexadecimal
notation
notation
LCD Display
Decimal notation
conversion value
Table 5-1-1.
1-1-4. Adjusting Remote Commander
The adjusting remote commander is used for changing the
calculation coefficient in signal processing, EVR data, etc. The
adju sti n g re mot e c o mm a nde r pe rfo rm s bi -d ir ect io nal
communication with the unit using the remote commander
signal line (LANC). The resultant data of this bi-directional
communication is written in the non-volatile memory.
calculation coefficient in signal processing, EVR data, etc. The
adju sti n g re mot e c o mm a nde r pe rfo rm s bi -d ir ect io nal
communication with the unit using the remote commander
signal line (LANC). The resultant data of this bi-directional
communication is written in the non-volatile memory.
1.
Using the adjusting remote commander
1)
Connect the adjusting remote commander to the LANC
terminal.
terminal.
2)
Ad j u s t t h e HOLD swit c h of t he a dj ust i ng rem ot e
commander to “HOLD” (SERVICE position).
commander to “HOLD” (SERVICE position).
If it has been properly connected, the LCD on the adjusting
remote commander will display as shown in Fig. 5-1-7.
remote commander will display as shown in Fig. 5-1-7.
Fig. 5-1-7.
3)
Operate the adjusting remote commander as follows.
•
•
Changing the page
The page increases when the EDIT SEARCH+ button
is pressed, and decreases when the EDIT SEARCH–
button is pressed. There are altogether 16 pages,
from 0 to F.
is pressed, and decreases when the EDIT SEARCH–
button is pressed. There are altogether 16 pages,
from 0 to F.
•
Changing the address
The address increases when the FF (
) ) button is
pressed, and decreases when the REW (
0) button is
pressed. There are altogether 256 addresses, from 00
to FF.
to FF.
•
Changing the data (Data setting)
The data increases when the PLAY (
( ) button is
pressed, and decreases when the STOP (
p) button is
pressed.
There are altogether 256 data, from 00 to FF.
•
Writing the adjustment data
The PAUSE button must be pressed to write the
adjustment data (D, E, F page) in the nonvolatile
memory.
(The new adjustment data will not be recorded in the
nonvolatile memory if this step is not performed.)
adjustment data (D, E, F page) in the nonvolatile
memory.
(The new adjustment data will not be recorded in the
nonvolatile memory if this step is not performed.)
4)
Select page: 0, address: 01, and set the data to 01, and
enables Page D and E, F to be adjusted.
enables Page D and E, F to be adjusted.
5)
After completing all adjustments, set data: 00 to page: 0,
address: 01 and turn off the main power supply (8.4V)
once.
address: 01 and turn off the main power supply (8.4V)
once.
2.
Precautions upon using the adjusting remote
commander
Mishandling of the adjusting remote commander may erase the
c orr ec t a dj us tm ent dat a a t t i mes . T o pre ve nt t hi s , i t i s
recommended that all adjustment data be noted down before
beginning adjustments and new adjustment data after each
adjustment.
c orr ec t a dj us tm ent dat a a t t i mes . T o pre ve nt t hi s , i t i s
recommended that all adjustment data be noted down before
beginning adjustments and new adjustment data after each
adjustment.
0 1 2 3 4 5 6 7 8 9 A b c d E F
0 1 2 3 4 5 6 7 8 9 A B C D E F
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
0
:
00
:
00
Page
Data
Address
Click on the first or last page to see other CCD-TRV54E / CCD-TRV56E / CCD-TRV62 / CCD-TRV64E / CCD-TRV72 / CCD-TRV82 / CCD-TRV94 / CCD-TRV94E service manuals if exist.