CCD-TRV54E, CCD-TRV56E, CCD-TRV62, CCD-TRV64E, CCD-TRV72, CCD-TRV82, CCD-TRV94, CCD-TRV94E (serv.man2) - Sony Movie Service Manual (repair manual). Page 2

– 2 –

5

FP-512 flexible board

   

2

Screw(M2x4)

3

Screw(M2x4)

Two claws

Claw

1

Two screws(M2x4)

4

Front panel block

2. Remove the front panel block.

3. Remove the four screws at the bottom side.

4. Remove the three screws shown in the figure below.

7. When the loading motor opeerates, apply the voltage to the

loading motor terminal to lower the cassette compartment.
When the loading motor does not operate, remove the screw
shown in the figure below and lower the cassette compartment
with your hand.

8. Check the cassette compartment has descended to its original

position, and remove the screw (Lock Ace M2) shown in Fig.1.

9. After removing the cabinet (S) ,remove the cabinet (R) referring

to “DISASSEMBLY” in the service manual.

98F0990-1

Printed in Japan ©1998. 6

2

Two screws(M2x4)

1

Two screws(M2x4)

5. Remove the battery panel assembly with pulling the cabinet (L)

assembly in direction of the arrow.

6. Remove the screw (Lock Ace M2) shown in the figure below,

and remove the cabinet (L) assembly .

Cabinet (L) assembly

Screw (Lock Ace M2)

Connector 
CN704,12P

Battery panel block

Gear

Screw

Loading motor

Motor terminal

1

Tilt-up the EVF block to the direction of arrow

2

Three screws(M2x4)