Read JBL P25t (serv.man4) User Guide / Operation Manual online
THANK YOU
for purchasing JBL P25T automotive tweeters.
We’ve organized this manual to make your
installation as simple and trouble-free as possible.
Please read it thoroughly before proceeding.
Remember to keep your sales receipt and this manual
in a safe place so both are available for future reference.
for purchasing JBL P25T automotive tweeters.
We’ve organized this manual to make your
installation as simple and trouble-free as possible.
Please read it thoroughly before proceeding.
Remember to keep your sales receipt and this manual
in a safe place so both are available for future reference.
tweeter
owner’s
manual
owner’s
manual
English
INSTALLATION WARNINGS AND TIPS
ABOUT THESE
INSTRUCTIONS
Installation of automotive stereo
components can require extensive
experience with a variety of mech-
anical and electrical procedures.
Although these instructions explain
how to install JBL P25T tweeters in
a general sense, they do not show
the exact installation methods for
your particular vehicle. If you feel
you do not have the experience, do
not attempt the installation yourself
but, instead, ask your authorized
JBL car audio dealer about profes-
sional installation options.
INSTRUCTIONS
Installation of automotive stereo
components can require extensive
experience with a variety of mech-
anical and electrical procedures.
Although these instructions explain
how to install JBL P25T tweeters in
a general sense, they do not show
the exact installation methods for
your particular vehicle. If you feel
you do not have the experience, do
not attempt the installation yourself
but, instead, ask your authorized
JBL car audio dealer about profes-
sional installation options.
LOUD MUSIC AND
HEARING
Playing loud music in an automo-
bile can permanently damage your
hearing, as well as hinder your
ability to hear traffic. The maximum
volume levels achievable with
JBL speakers, combined with high
power amplification, may exceed
safe levels for extended listening.
We recommend using low volume
levels when driving. JBL accepts
no liability for hearing loss, bodily
injury, or property damage as a
result of use or misuse of this
product.
HEARING
Playing loud music in an automo-
bile can permanently damage your
hearing, as well as hinder your
ability to hear traffic. The maximum
volume levels achievable with
JBL speakers, combined with high
power amplification, may exceed
safe levels for extended listening.
We recommend using low volume
levels when driving. JBL accepts
no liability for hearing loss, bodily
injury, or property damage as a
result of use or misuse of this
product.
ABOUT THE FILTER
Passive filter design involves pre-
cise circuit design and component
selection. Moreover, a well-
designed filter circuit provides an
intended electrical response, when
combined with the electrical pro-
perties of the speaker, to provide a
particular acoustic response. Each
enclosed filter has been optimized
to provide a flat response when
used with a JBL P25T tweeter.
Passive filter design involves pre-
cise circuit design and component
selection. Moreover, a well-
designed filter circuit provides an
intended electrical response, when
combined with the electrical pro-
perties of the speaker, to provide a
particular acoustic response. Each
enclosed filter has been optimized
to provide a flat response when
used with a JBL P25T tweeter.
Do not use another brand or type of
passive crossover, or connect
more than one tweeter to a
crossover. Doing so may damage
the tweeter.
passive crossover, or connect
more than one tweeter to a
crossover. Doing so may damage
the tweeter.
INSTALLATION TIPS
• Always wear protective eyewear
• Always wear protective eyewear
when using any tools.
• Turn off all audio components
and other electrical devices
before you start. Disconnect the
negative (–) lead from your
vehicle’s battery.
before you start. Disconnect the
negative (–) lead from your
vehicle’s battery.
• Keep speakers in their package
until final installation. When mov-
ing a speaker, always rest it with
the cone or dome facing up.
Never use force to install any
speaker.
ing a speaker, always rest it with
the cone or dome facing up.
Never use force to install any
speaker.
• Check clearances on both sides
of a planned mounting surface
before drilling any holes or
installing any screws. Remember
that the screws can extend
behind the surface.
before drilling any holes or
installing any screws. Remember
that the screws can extend
behind the surface.
• At the installation sites, locate
and make a note of all fuel lines,
hydraulic brake lines, vacuum
lines and electrical wiring. Use
extreme caution when cutting or
drilling in and around these
areas.
hydraulic brake lines, vacuum
lines and electrical wiring. Use
extreme caution when cutting or
drilling in and around these
areas.
• Before drilling or cutting holes,
use a utility knife to remove
unwanted fabric or vinyl to keep
material from snagging in a drill
bit or saw.
unwanted fabric or vinyl to keep
material from snagging in a drill
bit or saw.
• For door installations, check the
clearance with the windows
throughout the range of the win-
dow’s travel, and verify that a
mounted speaker will not inter-
fere with the window crank or
power-window mechanism.
throughout the range of the win-
dow’s travel, and verify that a
mounted speaker will not inter-
fere with the window crank or
power-window mechanism.
• If mounting speakers elsewhere,
check for clearance around rear-
deck torsion bars, glove box or
other structural elements.
deck torsion bars, glove box or
other structural elements.
• Do not mount speakers where
they will get wet.
SPEAKER PLACEMENT
ABOUT PLACEMENT
Figures 1 and 2 show possible speaker placements with Figure 1 being more
desirable. We recommend using the kick panel for mounting to obtain the
best staging and imaging in most vehicles.
Figures 1 and 2 show possible speaker placements with Figure 1 being more
desirable. We recommend using the kick panel for mounting to obtain the
best staging and imaging in most vehicles.
Figure 1. Mounting the woofer and tweeter in the kick panel.
Figure 2. Mounting the woofer in the door and the tweeter in the kick panel.
TWEETER
and
WOOFER
on kick panel
TWEETER
on kick panel
WOOFER
in factory
door location
Tweeter
and Woofer
on kick panel
Tweeter
on kick panel
Woofer in factory
door location
English
1
2
(–) SMALL LUG
(+) LARGE LUG
BLACK
RED
RED (+)
RED (+)
BLACK (–)
BLACK (–)
1
2
3
4
1. Slide screw up or
down to adjust
tweeter angle.
down to adjust
tweeter angle.
4. Securely tighten
the large hand nut.
the large hand nut.
2. Tighten nut and
washer to lock
angle settings.
washer to lock
angle settings.
3. Rotate entire assembly
to aim angled tweeter
toward listener.
to aim angled tweeter
toward listener.
Figure 4. Mounting the tweeter
using the I-Mount™ (patent no.
5,859,917) flush-mounting kit.
Also see Figure 5.
using the I-Mount™ (patent no.
5,859,917) flush-mounting kit.
Also see Figure 5.
Figure 5. Aiming the tweeter at a
desired listening position.
desired listening position.
Figure 3. Surface-mounting the
tweeter and connecting the
crossover.
tweeter and connecting the
crossover.
English
TWEETER INSTALLATION
SPECIFICATIONS
P25T
Type:
Type:
1" tweeter
Speaker Impedance:
4 ohms
Power Handling:
60W RMS, 180W Peak
(with enclosed filter)
(with enclosed filter)
Sensitivity (2.83V, 1m):
90dB
Frequency Response:
2.5kHz – 23kHz
Mounting Depth:
31mm
Cut-Out Diameter:
45mm
GENERAL CARE
The loudspeaker grilles may be cleaned with a damp cloth. Do not use any
cleaners or solvents on the grilles or the speaker cones.
The loudspeaker grilles may be cleaned with a damp cloth. Do not use any
cleaners or solvents on the grilles or the speaker cones.
A valid serial number is required for warranty coverage.
Features, specifications and appearance are subject to change without
notice.
Features, specifications and appearance are subject to change without
notice.
Declaration of Conformity
We, Harman Consumer International
2, route de Tours
72500 Chateau-du-Loir
France
72500 Chateau-du-Loir
France
declare in own responsibility that the product
described in this owner’s manual is in compliance with
technical standards:
described in this owner’s manual is in compliance with
technical standards:
EN 50081-1:1992
EN 50082-1:1997
EN 50082-1:1997
Emmanuel Millot
Harman Consumer International
Chateau-du-Loir, France. 2/03
JBL Consumer Products
250 Crossways Park Drive, Woodbury, NY 11797 USA
1.800.336.4JBL (4525) • FAX 516.682.3523 • www.jbl.com
© 2003 Harman International Industries, Incorporated
JBL is a registered trademark of
Harman International Industries, Incorporated
Harman International Industries, Incorporated
Part No. P25TOM2/03
English