Read Sony CCD-TR618 / CCD-TR618E / CCD-TR718E / CCD-TR728E / CCD-TR818 / CCD-TRV49 / CCD-TRV49E / CCD-TRV58 / CCD-TRV58E / CCD-TRV59E / CCD-TRV68 / CCD-TRV78 / CCD-TRV78E / CCD-TRV88 / CCD-TRV98 / CCD-TRV98E Service Manual online
5-19
Fig. 5-1-12.
Burst position
For NTSC model
Burst position
For PAL model
7. Color Reproduction Adjustment
Adjust the color Separation matrix coefficient so that proper color
reproduction is produced.
reproduction is produced.
Subject
Color bar chart
(Color reproduction adjustment frame)
(Color reproduction adjustment frame)
Measurement Point
Video output terminal
Measuring Instrument
Vectorscope
Adjustment Page
F
Adjustment Address
47, 49, D7, D8
Specified Value
All color luminance points should
settle within each color reproduction
frame.
settle within each color reproduction
frame.
Note:
NTSC model: CCD-TR618/TR818/TRV49/TRV58/TRV68/
TRV78/TRV88/TRV98
PAL model: CCD-TR618E/TR718E/TR728E/TRV49E/TRV58E/
TRV59E/TRV78E/TRV98E
Switch setting:
1)
1)
NIGHT SHOT (Lens block) ............................................ OFF
2)
DIGITAL ZOOM (Menu display) ................................... OFF
3)
STEADY SHOT (Menu display) ..................................... OFF
4)
LIGHT (FK-1000 block) .................................................. OFF
Adjusting method:
1)
1)
Select page: 0, address: 01, and set data: 01.
2)
Select page: F, address: 8B, and write down the data.
3)
Select page: F, address: 8B, set data: 29 and press the PAUSE
button.
button.
4)
Select page: F, address: 2B, set the following data and press
the PAUSE button.
the PAUSE button.
17: NTSC model
97: PAL model
97: PAL model
5)
Select page: 6, address: 01, set data: 3D, and press the PAUSE
button.
button.
6)
Adjust the GAIN and PHASE of the vectorscope, and adjust
the burst luminance point to the burst position of the color
reproduction frame.
the burst luminance point to the burst position of the color
reproduction frame.
7)
Change the data of page: F, address: 47, 49, D7 and D8, settle
each color luminance point in each color reproduction frame.
each color luminance point in each color reproduction frame.
Note:
Be sure to press the PAUSE button of the adjustment remote
commander before changing the addresses. If not, the new data
will not be written to the memory.
commander before changing the addresses. If not, the new data
will not be written to the memory.
Processing after Completing Adjustments:
1)
1)
Select page: F, address: 8B, set the data written down at step
2), and press the PAUSE button.
2), and press the PAUSE button.
2)
Select page: 6, address: 01, set data: 00, and press the PAUSE
button.
button.
3)
Select page: 0, address: 01, and set data: 00.
Click on the first or last page to see other CCD-TR618 / CCD-TR618E / CCD-TR718E / CCD-TR728E / CCD-TR818 / CCD-TRV49 / CCD-TRV49E / CCD-TRV58 / CCD-TRV58E / CCD-TRV59E / CCD-TRV68 / CCD-TRV78 / CCD-TRV78E / CCD-TRV88 / CCD-TRV98 / CCD-TRV98E service manuals if exist.