Read Sony SDM-X75F / SDM-X75K / SDM-X95F / SDM-X95K Service Manual online
5) Disassemble Rear Flame (9 screws)
* Attention to Earth and Wiring
* Not wire near Security Lock Hall
* Attention to Earth and Wiring
* Not wire near Security Lock Hall
1) Remove 4 screws at Hinge on Stand.
2) Remove 2 Screw Cover's on the top and
disassemble Rear Cover (4 screws).
disassemble Rear Cover (4 screws).
3) Disassemble Rear Cover from the bottom
side. It can be easily detached by using jig
(plastic spatula).
side. It can be easily detached by using jig
(plastic spatula).
4) Disassemble AC Power SW.
6) Disassemble each boards on an as-needed
basis.
Main (4 screws), Power (5 screws), USB I1 (2
screws)
basis.
Main (4 screws), Power (5 screws), USB I1 (2
screws)
7) Disassemble other parts
Speaker ( 4 screws), Audio O ut (1 screw),
USB I2 (3 screws), Panel Flame (3 screws)
Speaker ( 4 screws), Audio O ut (1 screw),
USB I2 (3 screws), Panel Flame (3 screws)
8) Assemble surely Plastic Cover for USB.
* Required by Safety Standard
* Required by Safety Standard
D isasse m bly / P ro c e ss
14
SDM-X75F, K / SDM-X95F, K(E)
Click on the first or last page to see other SDM-X75F / SDM-X75K / SDM-X95F / SDM-X95K service manuals if exist.