Read Sony SDM-M51 (serv.man2) Service Manual online
1-4
10
Adjusting the tilt and height
This display can be adjusted within the angles shown below.
To adjust the angles, follow the procedure of the steps below.
1
Grasp the lower middle part of the display while
holding the display stand, then, tilt the LCD panel
adequately backward.
holding the display stand, then, tilt the LCD panel
adequately backward.
2
Grasp the lower sides of the LCD panel, then adjust
screen tilt.
screen tilt.
3
Grasp the lower sides of the LCD panel, then adjust
screen height.
screen height.
Note
When adjusting the screen tilt and height, proceed slowly and carefully,
being sure not to hit the LCD panel against the desk or the base of the
display stand.
being sure not to hit the LCD panel against the desk or the base of the
display stand.
To use the display comfortably
This display is designed so that you can set it up at a comfortable
viewing angle. Adjust the viewing angle of your display
according to the height of the desk and chair, and so that light is
not reflected from the screen to your eyes.
viewing angle. Adjust the viewing angle of your display
according to the height of the desk and chair, and so that light is
not reflected from the screen to your eyes.
70˚
30˚
64˚
40˚
11
GB
Customizing Your Monitor
You can make numerous adjustments to your monitor using the
on-screen menu.
on-screen menu.
Navigating the menu
Press the MENU button to display the main menu on your screen.
See page 12 for more information on using the MENU button.
See page 12 for more information on using the MENU button.
Use the M(+)/m(–) and OK buttons to select one of the following
menus. See page 12 for more information on using the
M(+)/m(–) and OK buttons.
menus. See page 12 for more information on using the
M(+)/m(–) and OK buttons.
Before making adjustments
Connect the monitor and the computer, and turn them on.
Wait for at least 30 minutes before making adjustments for the
best result.
Wait for at least 30 minutes before making adjustments for the
best result.
1
PHASE (page 13)
Select the PHASE menu to
adjust the phase when the
characters or pictures appear
fuzzy throughout the entire
screen. Adjust the phase after
adjusting the pitch.
adjust the phase when the
characters or pictures appear
fuzzy throughout the entire
screen. Adjust the phase after
adjusting the pitch.
2
PITCH (page 13)
Select the PITCH menu to
adjust the pitch when the
characters or pictures are
unclear in some areas of the
screen.
adjust the pitch when the
characters or pictures are
unclear in some areas of the
screen.
3
H CENTER (page 13)
Select the H CENTER menu
to adjust the picture’s
horizontal centering.
to adjust the picture’s
horizontal centering.
MENU
PHA SE
,
3 0
EX I T
PHA S E
1344
EX I T
P I T C H
5 0
EX I T
H C ENT E R
4
V CENTER (page 13)
Select the V CENTER menu
to adjust the picture’s vertical
centering.
to adjust the picture’s vertical
centering.
5
COLOR (page 14)
Select the COLOR menu to
adjust the color temperature
of the picture. This adjusts
the tone of the screen.
adjust the color temperature
of the picture. This adjusts
the tone of the screen.
6
MENU POSITION
(page 14)
(page 14)
Select the MENU
POSITION to change the on-
screen menu position.
POSITION to change the on-
screen menu position.
7
RESET (page 15)
Select the RESET menu to
reset the adjustments.
reset the adjustments.
8
Option (page 15)
Select m (option) menu to
adjust the monitor’s options.
The options include:
adjust the monitor’s options.
The options include:
• BACKLIGHT
• POWER SAVE
• LANGUAGE
• MENU LOCK
• POWER SAVE
• LANGUAGE
• MENU LOCK
5 0
EX I T
V C ENT E R
9 3 0 0 K
0 K
6 5 0
5 0 0 0 K
5 0 0 0 K
USER
A
L D J U ST
COLOR
EX I T
MEN
N
U POS I
I O
T
EX I T
S CREEN
A L L
RESE T
RESE T
RESE T
EX I T
0
1 0
EX I T
BAC K L I GH T
(continued)
Click on the first or last page to see other SDM-M51 (serv.man2) service manuals if exist.