Read Sony SDM-M51 (serv.man2) Service Manual online
1-2
6
Rear of the LCD display
0
Back cover (page 8)
Open this cover when you connect/disconnect cables or cords.
qa
DC IN connector/AC adapter (page 8)
This connector provides DC power to the display. Connect the
AC adapter to this connector.
AC adapter to this connector.
qs
AUDIO IN jack/Audio cord (page 8)
This jack inputs audio signals when connecting to the audio
output jack of the computer or other audio equipment.
output jack of the computer or other audio equipment.
qd
HD15 (RGB) input connector/HD15 (RGB) video
signal cable (page 7)
signal cable (page 7)
This connector inputs RGB video signals (0.7 Vp-p, positive)
and SYNC signals.
and SYNC signals.
* DDC (Display Data Channel) is a standard of VESA.
qf
Cable holder (page 8)
This part secures cables and cords to the monitor.
OPEN
Pin No.
Signal
1
Red
2
Green
(Sync on Green)
(Sync on Green)
3
Blue
4
ID (Ground)
5
DDC Ground*
6
Red Ground
7
Green Ground
8
Blue Ground
9
DDC + 5V*
10
Ground
11
ID (Ground)
12
Bi-Directional Data (SDA)*
13
H. Sync
14
V. Sync
15
Data Clock (SCL)*
5 4
3 2 1
6
7
8
9
10
11
12
13
14
15
7
GB
Setup
Before using your monitor, check that the following accessories
are included in your carton:
• LCD display
• Power cord
• AC adapter
• HD15 (RGB) video signal cable (this cable is already
are included in your carton:
• LCD display
• Power cord
• AC adapter
• HD15 (RGB) video signal cable (this cable is already
connected to the monitor)
• Audio cord (stereo miniplug)
• Cord clip (2)
• Macintosh adapter
• Windows Monitor Information/Windows Utility/Macintosh
• Cord clip (2)
• Macintosh adapter
• Windows Monitor Information/Windows Utility/Macintosh
Utility Disk
• Warranty card
• Notes for Macintosh users
• This instruction manual
• Notes for Macintosh users
• This instruction manual
Step 1: Connect the display to your
computer
Turn off the monitor and computer before connecting.
Note
Do not touch the pins of the video signal cable connector as this might
bend the pins.
bend the pins.
x
Connecting to an IBM PC/AT or compatible
computer
computer
x
Connecting to a Macintosh or compatible
computer
computer
Use the supplied Macintosh adapter.
* Refer to the supplied “Notes for Macintosh users” for further details.
IBM PC/AT or
compatible computer
compatible computer
HD 15 (RGB) video
signal cable (supplied)
signal cable (supplied)
to VIDEO output
Macintosh adapter
(supplied)
(supplied)
*
HD15 (RGB) video
signal cable (supplied)
signal cable (supplied)
to video output
Macintosh or
compatible computer
compatible computer
(continued)
Click on the first or last page to see other SDM-M51 (serv.man2) service manuals if exist.