CPD-E400, CPD-E400E, CPD-E400P - Sony Monitor Service Manual (repair manual). Page 21

Read Sony CPD-E400 / CPD-E400E / CPD-E400P Service Manual online

CPD-E400/E400E/E400P
Connect the communication cable of the computer to the connector located on the D board on the monitor.  Run the service software
and then follow the instruction.
IBM AT Computer
as a Jig
1-690-391-21
1
A-1500-819-A
Interface Unit
2
*The parts above (                ) are necessary for DAS adjustment.
1
3
D-sub
(9 Pin [female])
mini Din
(8Pin)
4 Pin
3-702-691-01
Connector Attachment
3
To BUS CONNECTOR
4 Pin
4 Pin
• Convergence Rough Adjustment
(1) Receive an image of the white crosshatch signals (white
lines on black).
(2) Make rough adjustment of the H and V direction conver-
gence by using 4-fold poles magnet.
(3) Make rough adjustment of the HMC and VMC by using 6-
fold poles magnet.
<“0” position of each magnet and TLH plate>
a) Align the protrusion marked with an arrow.
• White Balance Adjustment Specification
1. 9300 K
x = 0.283 
± 0.005
y = 0.298 
± 0.005
(All White)
2. 5000 K
x = 0.346 
± 0.005
y = 0.359 
± 0.005
(All White)
3. sRGB
x = 0.313 
± 0.005
y = 0.329 
± 0.005
(All White)
• Vertical and Horizontal Position and Size
Specification
• Focus adjustment
Adjust the focus volume 1 and 2 for the optimum focus.
• Convergence Specification
4-2
[2-fold poles
 magnet on the DY]
[4-fold poles magnet]
[6-fold poles magnet] [2-fold poles magnet
 on neck assy]
b) Flush the shaded portions of TLH plate with the DY rear
cover, as shown below.
TLH
plate
XCV
TLV
DY rear cover
TLH plate
[Rear view]
[Movements of TLH plate]
[Movements of XCV volume]
2-fold poles magnet
4-fold poles magnet
6-fold poles magnet
or
or
B
A
A
0.20 mm
B
All mode
0.24 mm
V
MODE
B
a
a     2.0 mm
b     2.0 mm
a
b
b
A
MODE
A
B
352 mm
264 mm
All mode
FOCUS 1
FOCUS 2
FBT ASSY

Display

Click on the first or last page to see other CPD-E400 / CPD-E400E / CPD-E400P service manuals if exist.

Random: