CPD-E200E - Sony Monitor Service Manual (repair manual). Page 15

1

Screw
(+BVTP 4 x 16)

3

Claw

4

H board

Picture tube

Bezel

Cushion

5

Menu button

2

H bracket

3

When one side of the rubber cap is
separated from the anode button, the
anode-cap can be removed by turning
up the rubber cap and pulling up it in
the direction of the arrow 

c

.

1

Don’t scratch the surface of anode-caps with shartp shaped mate-
rial!

2

Don’t press the rubber hardly not to damege inside of anode-caps!
A material fitting called as shatter-hook terminal is built in the
rubber.

3

Don’t turn the foot of rubber over hardly!
The shatter-hook terminal will stick out or damage the rubber.

NOTE: Short circuit the anode of the picture tube and the anode cap to the metal chassis, CRT shield or carbon painted on the CRT,

after removing the anode.

1

Turn up one side of the rubber cap in
the direction indicated by the arrow 

a

.

2

Using a thumb pull up the rubber cap
firmly in the direction indicated by the
arrow 

b

.

2-4