Read Sony DVP-S9000ES Service Manual online
4-1
SECTION 4
PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS
THIS NOTE IS COMMON FOR PRINTED WIRING
BOARDS AND SCHEMATIC DIAGRAMS.
(In addition to this, the necessary mote is printed
in each block.)
BOARDS AND SCHEMATIC DIAGRAMS.
(In addition to this, the necessary mote is printed
in each block.)
For printed wiring boards:
•
•
X
: indicates a lead wire mounted on the component
side.
•
x
: indicates a lead wire mounted on the printed side.
•
a
: Through hole.
•
b
: Pattern from the side which enables seeing.
(The other layers’ patterns are not indicated.)
For schematic diagram:
•
•
Caution when replacing chip parts.
New parts must be attached after removal of chip.
Be careful not to heat the minus side of tantalum capacitor,
because it is damaged by the heat.
New parts must be attached after removal of chip.
Be careful not to heat the minus side of tantalum capacitor,
because it is damaged by the heat.
•
All resistors are in ohms,
1
/
4
W (Chip resistors :
1
/
10
W) un-
less otherwise specified.
k
k
Ω
: 1000
Ω
, M
Ω
: 1000k
Ω
.
•
All capacitors are in µF unless otherwise noted.
pF :
µµF
50V or less are not indicated except for electrolytics and
tantalums.
tantalums.
•
All variable and adjustable resistors have characteristic curve
B, unless otherwise noted.
B, unless otherwise noted.
•
2
: nonflammable resistor.
•
5
: fusible resistor.
•
C
: panel designation.
•
f
: internal component.
•
C
: adjustment for repair.
•
U
: B+ Line.
•
V
: B– Line.
•
Circled numbers refer to waveforms.
•
Voltages are dc between measurement point.
•
Readings are taken with a color-bar signal on DVD refer-
ence disc and when playing CD reference disc.
ence disc and when playing CD reference disc.
•
Readings are taken with a digital multimeter (DC 10M
Ω
).
•
Voltage variations may be noted due to normal production
tolerances.
tolerances.
Caution:
Pattern face side:
Pattern face side:
Parts on the pattern face side seen from
(Side A)
the pattern face are indicated.
Parts face side:
Parts on the parts face side seen from
(Side B)
the parts face are indicated.
When indicating parts by reference
number, please include the board
name.
number, please include the board
name.
Note:
The components identi-
fied by mark
The components identi-
fied by mark
0
or dotted
line with mark
0
are criti-
cal for safety.
Replace only with part
number specified.
Replace only with part
number specified.
Note:
Les composants identifiés par
une marque
Les composants identifiés par
une marque
0
sont critiques
pour la sécurité.
Ne les remplacer que par une
pièce por tant le numéro
spécifié.
Ne les remplacer que par une
pièce por tant le numéro
spécifié.
DVP-S9000ES
•
Abbreviation
AUS : Australian model
CN
AUS : Australian model
CN
: Chinese model
CND : Canadian model
HK
HK
: Hong Kong model
Click on the first or last page to see other DVP-S9000ES service manuals if exist.