DVP-NS930V - Sony DVD Service Manual (repair manual). Page 11

1-4

A

Connect the SCART (EURO AV) cord (not supplied). Be sure to make the connections firmly to 
avoid hum and noise. When you connect using the SCART (EURO AV) cord, check that the TV 
conforms to S VIDEO or RGB signals. Refer to the operating instructions supplied with the TV 
to be connected. Also, when you set “LINE” to “S VIDEO” or “RGB” under “SCREEN 
SETUP” in the Setup Display (page 72), use a SCART (EURO AV) cord that conforms to each 
signal.

 

If you are connecting to a VCR
Connect your VCR to the LINE 2 jack on the player. The VCR can record the signal only from 
your TV.

B

Connect the yellow plug of the audio/video cord (supplied) to the yellow (video) jacks. You will 
enjoy standard quality images.

Use the red and white plugs to connect to the audio input jacks (page 21). (Do this if you are 
connecting to a TV only.)

C

Connect an S VIDEO cord (not supplied). You will enjoy high quality images.

D

Connect the component via the COMPONENT VIDEO OUT jacks using a component video 
cord (not supplied) or three video cords (not supplied) of the same kind and length. You will 
enjoy accurate colour reproduction and high quality images.
If your TV accepts progressive 525p/625p format signals, you must use this connection and set 
“COMPONENT OUT” to “PROGRESSIVE” in “SCREEN SETUP” (page 71). The 
PROGRESSIVE indicator lights up when the player outputs progressive signals.

When connecting to a wide screen TV
Depending on the disc, the image may not fit your TV screen. If you want to change the aspect 
ratio, please refer to page 71.

Yellow (Video)

White (L)

Red (R)

Yellow (Video)

White (L)

Red (R)

Red

Green

Blue

Red

Green

Blue

,continued

• Do not connect a VCR, etc. between your TV and the player. If you pass the player signals via the VCR, 

you may not receive a clear image on the TV screen. If your TV has only one audio/video input jack, 
connect the player to this jack.

• When you connect the player to your TV via the SCART (EURO AV) jacks, the TV’s input source is set 

to the player automatically when you start playback. In this case, press TV/DVD on the remote to return 
the input to the TV.

• If you set “LINE” to “RGB” in SCREEN SETUP (page 27, 73), the player outputs no component video 

signals.

• Consumers should note that not all high definition television sets are fully compatible with this product and 

may cause artifacts to be displayed in the picture. In the case of progressive scan picture problems, it is 
recommended that you switch the connection to the standard definition output. If there are questions 
regarding your Sony TV set’s compatibility with this DVD player, please contact our customer service 
centre.

• If you cannot view the pictures from a VCR through this player which is connected to a TV with RGB 

component jacks, set 

 to t (Audio/Video) on your TV. When you select 

 (RGB), the TV 

cannot receive the signal from the VCR.

• If you want to use your VCR’s SmartLink function, connect the VCR to your TV’s SCART (EURO AV) 

jack and connect the player to the TV with another jack.

• The SmartLink function may not work properly if your VCR is connected to your TV via the SCART 

(EURO AV) jacks on the player.

VCR

CD/DVD player

TV

Connect 
directly

Refer to the chart below to select the connection that best suits your system. Be sure to also read 
the instructions for the components you wish to connect.

Select one of the following connections, 

 through 

.

TV
• Surround effects: TVS DYNAMIC (page 54), 

TVS WIDE (page 54)

 (page 21)

Stereo amplifier (receiver) and two speakers
• Surround effects: TVS STANDARD (page 55)
or
MD deck/DAT deck
• Surround effects: TVS STANDARD (page 55)

 (page 22)

AV amplifier (receiver) having a Dolby* 
Surround (Pro Logic) decoder and 3 to 6 
speakers
• Surround effects: Dolby Surround (Pro Logic) 

(page 82)

 (page 23)

AV amplifier (receiver) with 5.1 ch input jacks 
and 4 to 6 speakers
• Surround effects: 

– Dolby Digital (5.1 ch) (page 82)
– DTS (5.1 ch) (page 82)
– Super Audio CD Multi channel (page 83)
– MPEG audio (5.1 ch) (page 83)

or

AV amplifier (receiver) with digital input jacks 
having a Dolby Digital, DTS**, or MPEG audio 
decoder and 6 speakers
• Surround effects:

– Dolby Digital (5.1 ch) (page 82)
– DTS (5.1 ch) (page 82)
– MPEG audio (5.1 ch) (page 83)

 (page 24)

,continued

z

If you connect an AV amplifier (receiver) that 
conforms to the 96 kHz sampling frequency, use 
connection .

* Manufactured under license from Dolby 

Laboratories. 
“Dolby”, “Pro Logic”, and the double-D symbol 
are trademarks of Dolby Laboratories.

** Manufactured under license from Digital 

Theater Systems, Inc. US Pat. No. 5,451,942, 
5,956,674, 5,974,380, 5,978,762 and other 
world-wide patents issued and pending. “DTS” 
and “DTS Digital Surround” are registered 
trademarks of Digital Theater Systems, Inc. 
Copyright 1996, 2000 Digital Theater Systems, 
Inc. All rights reserved.